492763
17
Zoom out
Zoom in
Previous page
1/22
Next page
S
E
L
E
C
T
HOW TO USE THE SLEEP KEY
The
Home Producer 8
has a SLEEP key that either
operates your component’s sleep timer or, if your
component does not have a sleep timer, it activates
the
Home Producer 8’s
built-in sleep timer, after you
activate SLEEP LOCK. To use the
Home Producer
8’s
SLEEP key, press SLEEP (SHIFT + MUTE).
If your component does not have a sleep timer, the
Home Producer 8
will access its own built-in timer.
To activate the built-in sleep timer, press SLEEP
(SHIFT + MUTE). The display will change to
[SLEEP 15]. To add time to the sleep timer, press
MENU -. Each press of MENU - will add 15 minutes
to the sleep timer, up to a total of 60 minutes. Once
the desired time is displayed on the LCD screen,
press SELECT. The display screen will change to
[SLEEP and the TIME].
Sleep Lock
If you would like the
Home Producer 8
to use its
built-in sleep timer on all of your components, you
can lock the SLEEP mode. To set-up the
Home
Producer 8
to use the internal sleep timer on all
components:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].
2 Press the MENU - key twice, the
display will change to [CONFIGURE].
Press SELECT, the display will
change to [THEATR SEL]. Press
MENU + twice, the display will read
[SLEEP LOCK]. Press
SELECT, the display will change to
[DISABLE].
3 Press MENU - one time to change
the display to [ENABLE] then press
SELECT. The display will return to
[DEVICE and the TIME]. Now,
whenever you press SLEEP (SHIFT
+ MUTE), the
Home Producer 8
will
use its own built-in sleep timer.
M
A
G
I
C
MENU-
S
E
L
E
C
T
MENU+
S
E
L
E
C
T
MENU-
S
E
L
E
C
T
M
A
G
I
C
MENU-
VOLUME LOCK
With the
Home Producer 8,
you can choose which
home entertainment component controls your
volume. When you originally set up the
Home
Producer 8,
each individual component operates its
own volume, provided the component has volume
control. You can change this setting so that one
component controls the volume no matter which
component the
Home Producer 8
is operating. For
example, to set-up the
Home Producer 8
to always
control the volume through your Amplifier:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].
2 Press the MENU - key twice, the
display will change to
[CONFIGURE]. Press SELECT, the
display will change to [THEATR SEL].
3 Press MENU - two times, the display
will read [VOL LOCK]. Press
SELECT, the display will change to
[UNLOCK].
4 Press MENU - one time to change
the display to [LOCK] then press
SELECT. Now press the key for the
component that will control your
volume. In this example, to control
the volume through your amplifier,
press AMP. Press SELECT. The
display will return to [DEVICE and
the TIME].
Now, when you use the volume keys on your
Home Producer 8,
the volume will be controlled by
the specified component.
To return volume control to each individual
component:
1 Press and hold MAGIC until the
display screen changes from
[DEVICE and the TIME] to
[TIMED SEQ].
S
E
L
E
C
T
MENU-
M
A
G
I
C
x 2
x 2
S
E
L
E
C
T
MENU-
(Device Key)
x 2
x 2
S
E
L
E
C
T
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 8090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 8090 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info