713038

Omnitronic BOB series Manual

28
Zoom out
Zoom in
Previous page
1/36
Next page
28
•
EN
5
Connections
BOB-10A subwoofer
1) Switch off the subwoofer and the units to be connected before making or changing the connections. As
signal source, audio units with line level output (e.g. mixer, preamplifier) can be connected to the inputs
via XLR and 6.3 mm plugs, balanced and unbalanced. Alternatively, unbalanced RCA jacks are
provided. The inputs are designed for stereo signals (R = right channel, L = left channel). When
connecting a mono device to the combo inputs, only use the left jack.
2) At the balanced XLR outputs LINK OUT the input signal fed through is available. This output allows
connecting the input of another active speaker system for additional PA applications.
3) Connect the passive satellite speakers to the speaker outputs (TO SATELLITE LEFT/RIGHT). Up to
four satellites per subwoofer output can be operated in parallel at 4 ohms. The speaker signal is simply
looped through to the next satellite via the rear screw terminals. In doing so you can easily set up 2.1, 4.1
and 8.1 configurations.
4) Finally, connect the supplied power supply cable to the corresponding input and the mains plug to an
outlet (230 V, 50 Hz). The subwoofer can also be operated with 115 V, 60 Hz. For this purpose, set the
voltage selector switch to the 115 V position.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omnitronic BOB series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omnitronic BOB series in the language / languages: English, German as an attachment in your email.

The manual is 10,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info