713038

Omnitronic BOB series Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
27
•
EN
4
Setup
The satellite speakers provide M8 threaded inserts for attaching the U-brackets which allow for wall or ceiling
installation. Use the optional extension U-brackets to mount the satellite speakers on top of each other.
M10 threaded inserts at the top and bottom are provided to mount the speakers onto the optional stand or
distance tube, or a truss or similar rigging structure via a clamp. With the optional stand adaptor the satellites
can be placed on a stand or distance tube with a standard tube diameter of 35 mm.
The BOB-10A and BOB-82X subwoofers can be placed as desired. Model BOB-10A is stackable when set
up horizontally. Both models have an M20 flange for mounting BOB-4 satellite speakers via the optional
distance tube.
The following accessories are available, the corresponding order numbers can be found in chapter 9.
Stand Distance tube Extension bracket Stand adaptor
Notes
Always install the PA system at a solid, plane, anti-slip, vibration-free, and oscillation-free location. Lay the
connection cables in such a way that nobody will trip over the cables. When stacking subwoofers lash them
up via clamping belts and protect them against flipping over. For overhead installation the satellites must
always be secured with an appropriate secondary attachment (e.g. safety bond). The products must be
installed securely and prevented from falling down. Serious injury to persons can be caused if the speaker
systems fall down. If you lack the qualification, do not attempt the installation yourself, but instead use a
professional installer. Improper installation can result in bodily injury and or damage to property. For
commercial use the country-specific accident prevention regulations of the government safety organization
for electrical facilities must be complied with at all times.
with M10 mounting thread,
height 107-170 cm
with M10 mounting thread,
height 67-117 cm
with M8 screws,
incl. speaker cable
for 35 mm tubes
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omnitronic BOB series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omnitronic BOB series in the language / languages: English, German as an attachment in your email.

The manual is 10,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info