812264

Olsberg ARINA 2.0 Manual

81
Zoom out
Zoom in
Previous page
1/160
Next page
Operating manual
for the user
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
LEVANA AQUA 2.0:
16:58
Buffer-ON temp.
Puffer-OFF temp.
°C
°C
70
50
Fig. 3.19 Touch control panel – Display for LEVANA AQUA, buer ON/OFF
Buer ON and buer OFF
The buer ON temperature can be set to between 35 °C and 65 °C
and the
buer OFF temperature can be set to between 40 °C and 70 °C.
The pellet replace ignites if both sensor temperatures are lower
than the buer ON temperature which has been set.
The pellet replace switches from the “Heating operation” operating
status to “Ready” if the bottom sensor temperature is higher than
the buer OFF temperature which has been set. In order to mini-
mise the loss of heat from the buer, the lowest temperatures for
the application should always be selected.
Example:
Buer ON factory setting: .........................................................................50 °C
Buer OFF factory setting: ...................................................................... 70 °C
The pellet replace only ignites if both sensor temperatures (top
and bottom) fall below 50 °C.
The pellet replace only goes into the “Ready” operating state if the
bottom sensor temperature rises to above 70 °C.
Operating keys in the “Settings” display
Operating modes / operating modes selection menu:
- Manual
- Automatic
Languages / language settings selection menu
- German
- English
- French
Timer programs / switching times selection:
- Week block
- Weekend
- Working days
Date/time selection
- Date
- Time
- Time zones oset
Note! Switching between the pictograms is possible at any
time.
“OPERATING MODES” display
ManualAuto
Operation mode
Fig. 3.20 Touch control panel – Operating mode
MANUAL operating mode
ManualAuto
Operation mode
Fig. 3.21 Touch control panel – Manual operating mode
As soon as this operating mode has been selected, operation of the
pellet replace is possible with no further settings.
To do this, select the desired output stage and start heating opera-
tion with the “ON/OFF button”.
In “Manual” operating mode, the pellet replace heats at the preset
output stage in continuous operation until heating operation is
ended using the ON/OFF button.
Attention: saved switching times are only taken into consideration
in automatic mode.
The output stage can be set to 1-5 at any time:
ū Output stage 1 corresponds to the partial heat output
ū Output stage 5 corresponds to the nominal heat output
ū Factory setting: 4
Operating manual
for the user
We reserve the right to make technical changes
81
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 8178-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 81 11.04.2023 14:41:5811.04.2023 14:41:58
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg ARINA 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg ARINA 2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 34.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info