812264

Olsberg ARINA 2.0 Manual

79
Zoom out
Zoom in
Previous page
1/160
Next page
Operating manual
for the user
LEVANA 2.0 6 kW
LEVANA 2.0 8 kW
LEVANA AQUA 2.0
ARINA 2.0
INARA 2.0
EN
PARTY FUNCTION ON
The party function is switched on by a long press of the
“Party button”, i.e. the preset switching times (see “Timer
program”) are ignored and the pellet replace heats at the
output stage which is set.
If switched on in the “Heating operation” operating state,
the next “switch-o time” is ignored, the pellet replace
continues heating. The party function automatically
switches o at the next switch-on time and the pellet re-
place resumes working as programmed.
If switched on in the “Ready” operating state, the “switch-
o time” which has already occurred is ignored and the
pellet replace ignites in order to start heating operation.
The party function automatically switches o at the next
switch-on time and the pellet replace resumes working
as programmed.
PARTY FUNCTION OFF
The party function can be manually switched o by press-
ing the “Party button” again.
“Operating state” display
SWITCHED OFF
The pellet replace is switched o by pressing the “ON/
OFF button”. Automatic start (heating operation) cannot
occur in this operating state. Exception: frost protection
(see “Frost protection” chapter)
READY
Heating is enabled by pressing the “ON/OFF button”. Since
all of the conditions for starting the combustion process
are not met, the ignition process is not started. Instead, the
pellet replace is put into the “Ready” operating state. The
following conditions must be met to directly start the igni-
tion process:
- No outstanding error message
- Combustion chamber door closed
- Pellet reservoir cover closed
- No relay test is currently being performed (service)
- Flame temperature has cooled to below 100 °C
- The connected external room temperature sensor
contact is closed.
-
The room temperature has dropped to the set value.
- The current time is within the switching time
(with switching time active).
IGNITION
The pellets are automatically deposited in the burner
trough and ignited. Ignition takes longer during initial
commissioning because the screw conveyor is lled with
pellets rst. An extended special ignition program is
started after an error message.
START
The pellet volume is steadily increased until the maximum
output stage is reached.
HEATING OPERATION
The pellet replace heats to the output stage which is set.
CLEANING
Minor cleaning:
“Minor cleaning” is carried out every hour
takes a short time. The screw motor is switched o and the
ue exhauster runs at maximum speed. The burner trough is
thus cleaned. Heating operation automatically continues.
Major cleaning:
“Major cleaning” is carried out every eight
hours. Here, the combustion process is stopped. The screw
motor is switched o and the ue exhauster runs at maximum
speed. The burner trough is thus cleaned. “Major cleaning” lasts
until the ame temperature has cooled to below 100 °C. The
combustion process automatically restarts.
BURNOUT
The combustion process is ended. After burnout, the
pellet replace is in “O” mode. The “ON/OFF button” must
be pressed to resume heating operation. If timer times are
set, then the pellet replace goes to ready. This requires
the pellet replace to have been started or put into ready
mode with the on button for the rst time.
“MENU” display
Ready
08:17
Desired °C
25
Party
Abb. 3.16 Touch-Bedienfeld - Anzeige MENÜ
Operating keys in the “MENU” display
WIFI
Selection options: WI-FI ON/OFF;
WI-FI settings; app settings
GENERAL INFORMATION
Software version;
Maintenance interval; Operating hours;
External requirements
GENERAL SETTINGS
Convection air blower; Frost protection;
Night time reduction; Max. output; Temperature drop;
Temperature OFF; Follow-up; Other settings (operating
modes, language settings, timer programs, date/time)
We reserve the right to make technical changes
79
78-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 7978-4643-2481_R6_LEVANA 2.0_ARINA 2.0_INARA 2.0_DE-EN-FR.indd 79 11.04.2023 14:41:5811.04.2023 14:41:58
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olsberg ARINA 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olsberg ARINA 2.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 34.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info