47662

Oce PP16C Operation Guide Manual

205
Zoom out
Zoom in
Previous page
1/218
Next page
B.4 RS-232C Protocol
B-8
H4: Parity
The factory setting is 0 (none).
H5: Protocol logic
The factory setting is 0.
H6: Buffer nearly-full threshold
A percentage value from 0 to 99. The factory setting is 90.
H7: Buffer nearly-empty threshold
A percentage value from 0 to 99. The factory setting is 70. The factory settings of the buffer
nearly-full and nearly-empty thresholds (H6 and H7) are subject to change without notice.
The difference between the nearly-full and nearly-empty thresholds allows the computer to
send a fairly large amount of data in a continuous stream.
H8: Received data buffer size
The input buffer size is specified in increments of 100 kB. The factory setting is 5 (500 kB).
B.4.2 PRESCRIBE FRPO D0 Command
The PRESCRIBE FRPO D0 command is provided to allow manipulating XON/XOFF when
an error has occurred on the serial interface. Table B-5 summarizes the error status
corresponding to different D0 values.
Parameter value Meaning
0None
1Odd
2Even
3 Ignored
Parameter value Meaning
0 Combination of DTR (positive logic) and XON/XOFF
1 DTR (positive logic)
2 DTR ( negative logic)
3 XON/XOFF
4ETX/ACK
Timing of XON transfer to
host while Ready or Waiting
Serial interface error
error not handled error handled
XON sent every 3-5 seconds D0=0 (default) D0=1
XON not sent D0=10 D0=11
Table B-5
… 205 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce PP16C Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce PP16C Operation Guide in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info