47662

Oce PP16C Operation Guide Manual

203
Zoom out
Zoom in
Previous page
1/218
Next page
B.3 Serial Interface (Option)
B-6
B.3 Serial Interface (Option)
Installing the optional serial interface board kit (IB-11) in the printer enables connection to a
computer with an RS-232C standard serial interface.
B.3.1 Interface Signals
Table B-4 below shows the pins and corresponding input and output signals of the RS-232C
interface connector.
B.3.2 Interface voltage levels
The voltage levels of the interface signals conform to EIA RS-232C specifications. The
voltage level of SPACE is 3 to 15 volts. The voltage level of MARK is -3 to -15 volts.
Voltages between -3 and 3 volts are undefined.
Pin In or out Signal Description
1 — FG Frame Ground. This pin is connected directly to the printer
frame.
2 Out TXD Transmit Data. This pin is used to output asynchronous data
sent from the printer to the computer. This signal is often used
in handshaking.
3 In RXD Receive Data. This pin is used to input serial asynchronous
data sent from the computer to the printer.
4 Out RTS Request To Send. This output is always high (above 3 volts).
5 In CTS Clear To Send. Not used.
6 In DSR Data Set Ready. Not used.
7 — SG Signal Ground. This pin is used to establish a common refer-
ence level for the voltages of all signals other than Frame
Ground.
20 Out DTR Data Terminal Ready . This pin is used to notify the status of
the printer buffer (i.e., nearly full or nearly empty) when hand-
shaking is used. The pin goes high (above 3 volts) when the
buffer is able to accept more data.
Table B-4
… 203 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce PP16C Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce PP16C Operation Guide in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info