47662

Oce PP16C Operation Guide Manual

207
Zoom out
Zoom in
Previous page
1/218
Next page
B.5 RS-232C Cable Connection
B-10
If you are not sure about the printer’s current parameter settings, reset them to the
values shown above (i.e., baud rate = 9600 bps, etc.). You can perform parameter
settings from the operation panel. See Chapter 3 Using the Operator Panel, section
3.5.2 Changing Serial Interface Parameters on page 3-35.
6
On the computer, set the same parameters as that of the printer. Most computers
allow you to do this by DIP switch settings that should be made before power is
turned on.
With Windows XP, make settings as follows:
1
Click on the Start button in the Windows XP task bar and align the cursor with
Settings, then click on Control Panel from among the items displayed.
2
The Control Panel window opens. Double click on System.
3
System Properties window opens. Click on the Hardware tab, then click on the
Device Manager button, and double click on Ports (COM & LPT).
Figure B-1
4
Double click on Communications Port.
5
The Communications Port Properties dialog is displayed for the selected COM
port. Click on the Port Settings tab and set the port properties.
Figure B-2
6
After setting the properties, click the OK button.
… 207 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce PP16C Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce PP16C Operation Guide in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info