47363
19
Zoom out
Zoom in
Previous page
1/25
Next page
18
COMMAND CENTER
Even if a registered file server is started after this system is running, polling is
performed from the system at regular intervals for automatically connecting to the
server.
6-6 Advanced > Protocols: AppleTalk
The printing system network component supports MacOS of various versions (See
Specifications.) and is compatible with LaserWriter driver version 8.x.
To set up the Ethernet interface to communicate via AppleTalk, enables AppleTalk
protocol operation on the printing system.
6-7 Advanced > Protocols: NetBEUI
Peer-to-peer printing is available using NetBEUI protocol. With this method, the printing
system is conveniently located in Windows Network Neighborhood.
6-8 Advanced > Management / E-mail: SMTP
The printing system network component offers an e-mail function. SMTP (Simple Mail
Transfer Protocol) is an embedded protocol to support this function. To use e-mail
function, the printing system needs connection to an e-mail server via POP3 protocol.
Item Description
AppleTalk Enables (On) or disable (Off) AppleTalk protocol.
Printer Name Specifies the name of the printing system in the AppleTalk network.
Zone Name Specifies the name of the AppleTalk zone (network). An asterisk (*) means
the default zone.
Item Description
NetBEUI Protocol Enables (On) or disables (Off) NetBEUI protocol.
Browse Master With this option set to On, the printing system becomes the browse master
and create a workgroup in Windows Network Neighborhood. With this
option set to Off, the printing system can only join an existing workgroup.
Note that with Browse Master disabled, the printing system will only
appear on the network if at least one machine in its workgroup is turned on
and can perform the browse master function.
Printer Name Printer Name correlates with Host Name in the TCP/IP General tab
(Advanced> Protocols: TCP/IP: General). If you want to change the
NetBEUI printer name, change the TCP/IP Host Name.
Workgroup Workgroup represents the workgroup which will appear in Entire Network
in Windows Network Neighborhood. The default workgroup name is
KM-NetPrinters
.
Comment You can enter comments here. (This can also be left blank.)
Item Description
SMTP Protocol Enables (On) or disables (Off) SMTP protocol. To use e-mail, this protocol
must be enabled.
SMTP Port Number Set the SMTP Port Number or use the SMTP default port 25. Click the Test
button to check the connection.
SMTP Server Name Enter the SMTP server name or its IP address. If entering the name, rather
than the IP address, a DNS server address must also be configured. The
DNS server address may be entered on the TCP/IP General tab
(Advanced> Protocols: TCP/IP: General).
Authentication Protocol Enables (On) or disables (Off) the SMTP authentication protocol.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1020 Operation Guide Command Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1020 Operation Guide Command Center in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info