47327
14
Zoom out
Zoom in
Previous page
1/25
Next page
COMMAND CENTER
13
5
Printer Page
This section includes settings that apply to the printing function of the device, such as
default print resolution or copy count. Pages in this section are available only to the
Administrator (if the Admin password has been set).
Default printer settings will be overridden by the printer driver settings. Settings that
affect the entire device, such as locking the operation panel, are found under Basic
page.
5-1 Printer > Defaults: System
The table below provides a summary of the items displayed on the Printer System
page.
5-2 Printer > Defaults: Media Input
The Media Input page provides you to configure input trays (cassettes) by type and
size. You can load different paper in the input trays and then command to print on paper
by specifying type or size on the printer driver software.
The instructions below are to configure the trays from the Media Input page. You can
also configure the input trays at the device’s operation panel. See the
printer’s
Operation Guide.
To configure an input tray, click the Size drop down list and select the size which
matches the paper you will use in the input tray. Click the Type drop down list and select
the type which matches the paper. To make the input tray the default input tray, click the
appropriate radio button under Default. Click Submit to take settings in effect.
Item Description
Emulation Sets emulation for each interface.
Copies Sets the number of copies to print.
Page Orientation Switches portrait or landscape page orientation.
KIR Mode Switches KIR (Kyocera Image Refinement) smoothing On or Off.
EcoPrint Switches EcoPrint On or Off to reduce the amount of toner to save the
printing costs. The default setting is On.
Resolution Changes the printing resolution from 300 dpi, 600 dpi, Fast 1200, and Fine
1200. The default setting is Fast 1200.
Item Description
Default Determines the default tray to feed paper from.
Tray Displays the trays including those provided by option.
Size Sets the size for the input tray. For the MP tray, a full list of available sizes
is displayed. For the paper cassette, the printer automatically displays the
detected paper size. Refer to the Printers Operation Guide for the
available paper sizes.
Type Sets the type for the input tray. For a full list of available types, refer to the
Printers Operation Guide.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1016 Operation Guide Command Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1016 Operation Guide Command Center in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info