47327

Oce OP1016 Operation Guide Command Center Manual

13
Zoom out
Zoom in
Previous page
1/25
Next page
12
COMMAND CENTER
4-4 Basic > Time
This machine can obtain the time from an SNTP server or NetWare server. The time
needs to be obtained when sending reports by e-mail.
Procedure for obtaining the time:
1
Click the Local Time Zone drop down list to select the time (Hour) for your region.
2
Enter the time (Minutes) for your region in the cell at the right of the drop down list.
3
Select the timer server. If an SNTP server is selected, enter the IP address of the
server.
4
Click the Submit button.
4-5 Basic > Reset
This page allows you to restart the machine in order to make all network settings in the
machine valid. It is also possible to select to have all network settings returned to their
factory default values.
Item Description
Current Local Time This displays the time obtained from the server.
Local Time Zone Sets a time difference. Click on the drop down list and select your region.
Time Protocol Select the server for obtaining the time. The available time servers are
shown below.
• None: The time is not obtained from the server.
• Netware: NetWare obtains time from the connected file server.
• SNTP Server: Time is obtained from SNTP on the network. Sets SNTP
server name or IP address.
Item Description
Restart Network interface When clicking the Restart button, the machine restarts. The setting
becomes effective when you restart the machine.
Always restart the machine after you have changed any settings for the
Basic > Network on page 11 and Advanced Page on page 15.
Set All Network Settings to
Factory Default
When clicking the Reset button, the machine returns to the setting in the
time of shipment from factory.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1016 Operation Guide Command Center at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1016 Operation Guide Command Center in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info