663191
5
Zoom out
Zoom in
Previous page
1/15
Next page
EN
EN
Assembly of Shifter
Install right brake lever according
to the manufacturer’s instruction.
Slide the shifter (1) onto the
handlebar.
Install the right hand grip (2)
onto the handlebar according
to the manufacturer’s instruc-
tions.
Position the shifter such that
the display (3) is visible to the
rider and the cables will be
unobstructed.
Tighten the clamp bolt to
2.0-2.5 Nm (18-22 in-lbs).
Never use lubricants or solvents
to install handlebar grips.
Make sure that the shifter
and the brake lever function
properly and are unobstructed
(re-adjust if necessary).
Never ride without the
handlebar grips. The turning
grip of the shifter could become
loose. This can result in a
severe injury.
1
3
2
2. ASSEMBLY OF COMPONENTS 2. ASSEMBLY OF COMPONENTS
Installing Shift Cable Housing
Route cable housing as shown
from the shifter to the hub interface.
Measure, cut and install the
appropriate length cable housing
(4) for the bicycle.
Full-length housing is recom-
mended for both shift cables.
Make sure that the cable
housing lengths are sufficient
to allow an extreme turning
angle. Also consider the influ-
ence of adjustable handlebars
and stems on the cable housing
lengths.
Secure cable housing to the frame.
The cable housing must remain
moveable for axle adjustments.
Avoid tight bends when install-
ing the shift cable housing.
Leave at least 150mm of hous-
ing unsupported at the hub
interface (5) to ease installation
and removal of the shift cable
hardware.
With housing length correct, install
end caps (6) at both ends of each
housing.
150m
m
4
5
6
4
7
8
2 .18
2.11
2.12
2.13
2.14
2.11
2.12
2.13
2.14
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NuVinci N360 -2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NuVinci N360 -2010 in the language / languages: English as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NuVinci N360 -2010

NuVinci N360 -2010 User Manual - German - 15 pages

NuVinci N360 -2010 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info