787650
19
Zoom out
Zoom in
Previous page
1/31
Next page
USER MANUAL
ENGLISH
16
4. Depress the accelerate pedal (N Figure 12), operate the machine
forward or backward by steering wheel (L Figure 12) together with
forward-backward switch (I Figure 12), you can adjust speed by
speed adjusting knob (F Figure 12).
5. Adjust solution flow by solution adjusting button (G Figure 12)
base on cleaning requirement.
6. You can charge your phone or pad through USB charging port (K
Figure 12) when the key switch (A Figure 12) is turned to “ON”.
7.
8.
Press the horn button (H Figure 12) to warn people when necessary.
If necessary, press the emergency button (M Figure 12) for machine
emergency stop.
NOTE
The brush motor, vacuum motor, drive motor and con-
trol circuit are protected by overload protector (P Fig-
ure 12). When the overload protector trip, do not reset
it immediately without finding out the root cause, and
make sure the motor is cooling-off before reset.
Stopping the machine
9. Loosen the accelerate pedal (N, Figure 12), the machine stops run-
ning.
10. Press One-Start button (D, Figure 12) to stop brushes and vacuum
motor. The brushes and squeegee are lifted up from the floor auto-
matically. The vacuum system is closed after a few seconds delay.
11. Turn the key switch to “OFF”.
12. Ensure the machine is stopped.
MACHINE OPERATION (SCRUBBING AND DRYING)
1. Start the machine according to procedures in previous paragraphs.
2. Start cleaning by following procedures in section of “Starting the machine”.
3. If necessary, stop the machine to adjust squeegee according to section “Adjusting the balance of squeegee”.
J
AGM
F
L
C
A
I
H
D
M
N
B
P
100%
G
E
K
Figure 12
MACHINE START AND STOP
Starting the machine
1. Prepare the machine as shown in previous paragraph.
2. Sit on the seat (J, Figure 12), insert the key switch (B) and turn it to “I”. If the LCD (A, Figure 12) is 100%, the
batteries are fully charged for use. If the LCD (A, Figure 12) is 10%, batteries must be charged before operation.
[Refer to MENTAINENCE chapters for batteries charging]
3. Press One-Start button (D, Figure 12) to start the machine, the squeegee and brushes are released to the floor
automatically, vacuum motor begins to work.
NOTE
Make sure the squeegee assembly is lifted before the machine steer backward, or the Machine
will be stopped and LCD screen show “Error” information.
NOTE
Make sure to turn off brush button before brush assembly is lifted, and lift the brush assembly
before machine steers forward/backward.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk SC3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk SC3500 in the language / languages: English as an attachment in your email.

The manual is 8.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info