787650
18
Zoom out
Zoom in
Previous page
1/31
Next page
USER MANUAL
ENGLISH
15
1. Open the cover (G Figure 10) and check that the recovery tank (F Figure 10) is empty, otherwise empty it with
the drain hose (E Figure 10).
2. Carefully overturn the recovery tank (F, Figure 10).
3. Open the cap (I Figure 10).
4. Replace or fill the jug (H Figure 10) with any standard gallon container of detergent suitable for the work to be
per formed (highly concentrated detergents). Do not fill the detergent tank completely, leave a few centimeters
from the edge.
WARNING!
Use only low-foam and non-flammable detergents, intended for automatic scrubber applications.
NOTE
To install a new jug container, determine the cap size and if it is the smaller cap, remove the
reducing adapter from the hose cap (I Figure 10). Insert the suction tube into the jug (H Figure
10). Pushdown firmly on the cap (I) and twist at the same time to put the cap back onto the jug
(H Figure 10). In case of new system, system emptied for cleaning, etc., wait for the hoses to fill
up, before starting the Chemical Mixing System.
DRIVE MOTOR INSPECTION
1. Turn the key switch (G Figure 11) to “ON”
2. Depress the accelerate pedal (D Figure 11) slightly then loosen it to
check if the machine can be steered forward and stopped.
3. To ensure the security, confirm if the machine can be stopped im-
mediately by pressing the emergency button (F Figure11). Rotate
the emergency button to reset it.
CAUTION
Climbing capacity of the machine must not exceed 10%.
CAUTION
The brake of drive motor is unstuck when the motor
works normally, it locks when the motor stops working.
In some special cases, such as machine pack-
ing/unpacking, machine fault etc., need to move the ma-
chine without drive motor working, please insert A
screwdriver (Figure 11 A) drive motor brake (Figure 11
B) and motor (Figure 11 C) between the grooves (Figure
11), the machine brake is released, the machine can be
moved, after completion, please take out the screwdriver,
otherwise will not be able to start the machine.
C
B
A
C
B
A
D
G
F
E
Figure 11
3. (For machines with Chemical Mixing System) Fill the tank (D Figure 10) with clean water by using the filler
neck (B Figure 10) and the rear filler neck (C Figure 10). Refill to the reference mark “F” of the level check
hose (C Figure 10). The water temperature must not exceed + 104°F (+40°C).
DETERGENT TANK FILLING (FOR MACHINES WITH CHEMICAL MIXING SYSTEM)
WARNING!
Use only low-foam and non-flammable detergents, intended for automatic scrubber
applications.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk SC3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk SC3500 in the language / languages: English as an attachment in your email.

The manual is 8.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info