776299
34
Zoom out
Zoom in
Previous page
1/99
Next page
SECTION III OPERATION MANUAL
Utrecht
- 33 - Ref 002
BUFFER MODE
The data storage type for data logging (recorder) function that can be
performed in two ways: Linear or Circular.
Neither mode will affect any memory allocated for Statistical Analysis.
Linear Recording stops when the memory is full.
Circular Recording is stopped when stop date/time is reached, or manually.
Once memory is full, the oldest data is over-written.
Note: When EN 50160 recording mode is selected the instrument puts the message:
Enter for default sett. after pressing any cursor key.
- If Enter is pressed the instruments prepares default settings and
selections as are defined in chapter 3.1. d. This settings are also
recommended for EN 50160 recording mode.
- If ESC is pressed current settings are accepted.
3.3. SIGNALS sub-menu
This menu allows selection of signals, and calculated parameters for storage during Data
Logging (recording) for PERIODICS and EN 50160. A maximum of 64 signals can be
selected; the number of residual free locations is shown in the upper right corner of the
display and is common for Signals and Harmonics menus.
Signals sub-menu enables selection of phase and/or total 3ϕ values.
Note: Selecting a voltage signal U will also automatically enable logging of Voltage
Anomalies for that phase (if Voltage Anomaly recording mode is selected as
FIXED or VARIABLE).
Fig. 10: Signal Sub-menu
Use LEFT, RIGHT, UP and DOWN keys to select the required signal. Enable or disable
the signal for recording with the SELECT key.
Press ENTER to confirm the new settings or ESC to cancel.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nieaf-Smitt PQA 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nieaf-Smitt PQA 6600 in the language / languages: English as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info