776299
32
Zoom out
Zoom in
Previous page
1/99
Next page
SECTION III OPERATION MANUAL
Utrecht
- 31 - Ref 002
Use LEFT and/or RIGHT keys to decrease / increase level of selected
input(s).
TRIG. dV/scan
Input slope for level triggering
Use the SELECT key to toggle between selected input triggers
(Ux: V or Ix: A) and none (----).
STORE MODE
The data storage type for data logging (recorder) function that can be
performed in two ways: Single shot or Repeat.
Neither mode will affect any memory allocated for Statistical Analysis.
Single shot Recording stops when the memory is full.
Repeat <n>
Recording is stopped when stop date/time is reached, or manually, or
when repeat value is reached.
Once memory is filled, the oldest data is over-written.
Range: 2x to 254x or <max>
MAX. REC. BUF Maximum buffer length according to selected parameters.
3.2.5. Parameters in EN 50160
rec.mode: EN 50160
start MANUAL
stop MANUAL
flick: ON
per: ON
anom. window FIXED
main. integ. per.: 1 min
power sub. i.p. : 1 per
nominal voltage : 230.0 V
upper limit : 10% 253.0 V
lower limit : 10% 207.0 V
buffer mode : circular
RECORDER :
conditions
1
2:44:00
20.05.2001.
START Use SELECT key to toggle between MANUAL and Date / time.
Manual Recording starts immediately if period recording is OFF.
If Periodic Recording is ON, there is a “null” seconds delay.
Date /
time
START occurs at user preset date and time.
Recording can be stopped manually at any time.
Use LEFT or RIGHT keys to select between Date / Time fields and
the UP & DOWN keys to set a new date or time.
Only valid date/time values will be accepted.
STOP Use SELECT key to toggle between MANUAL and Date / time.
Manual STOP in manual mode is immediate.
Date /
time
STOP occurs at user preset date and time.
Recording can be stopped manually at any time.
Use LEFT or RIGHT keys to select between Date / Time fields and
the UP & DOWN keys to set a new date or time.
Only valid date/time values will be accepted.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nieaf-Smitt PQA 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nieaf-Smitt PQA 6600 in the language / languages: English as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info