552651
30
Zoom out
Zoom in
Previous page
1/47
Next page
28
Auto Scan
In this mode, the KVM switch automatically switches from one power-on computer to
the next sequentially in a fixed interval. During Auto Scan mode, the OSD displays the
name of the selected computer. When Auto Scan detects any keyboard or mouse
activity, it suspends the scanning till activity stops; it then resumes with the next
computer in sequence. To abort the Auto Scan mode, press the left Ctrl twice, or,
press any front button. Scan Type and Scan Rate set the scan pattern. Scan Type
( F4 : More\Scan Type) determines if scanned computers must also be eye mark
selected. Scan Rate ( F4 : More\Scan Rate) sets the display interval when a computer
is selected before selecting the next one.
Manual Scan
Scan through power-on computers one by one by the keyboard control. You can type
( F4 : More\Scan Type) to determine if scanned computers must also be eye mark
selected. Press the up arrow key “ Ï “ to select the previous computer and the down
arrow key “ Ð “ to select the next computer. Press any other key to abort the Manual
Scan mode.
Audio Stick
An optional multimedia module can be LINKed to the back of each KVM Switch for
selecting microphone and stereo speaker signals. There are two options for Audio Stick:
On and Off. When set to 'On', audio selection follows computer selection. When set to
'Off', audio selection stops following computer selection. It is useful if you want to listen
to a particular computer's audio signal while operating other computers. The non-
volatile memory stores the Audio Stick setting.
Scan Type
Ready PC +1: In Scan mode, scan through power-on and eye mark selected
computers.
Ready PC: In Scan mode, scan through power-on computers.
1 Only: In Scan mode, scan through any 1 selected computer regardless of computer
power status. The non-volatile memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3
seconds, 8 seconds, 15 seconds, and 30 seconds. The non-volatile memory stores the
Scan Rate setting.
Keyboard Speed
NewStar Digital KVM via IP offers keyboard typematic setting that overrides the
similar settings in BIOS and in Windows. Available speed options are Low, Middle,
Fast and Faster as 10, 15, 20 and 30 characters/sec respectively. The non-volatile
memory stores the Keyboard Speed setting.
Hotkey Menu
When you hit the left Ctrl key twice within two seconds, the "Hotkey Menu" appears
displaying a list of hotkey commands if the option is On. The 'Hotkey Menu' can be
turned Off if you prefer not to see it when the left Ctrl key is hit twice. The non-volatile
memory stores the Hotkey Menu setting.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info