552651

Newstar NS-841HDI Manual

45
Zoom out
Zoom in
Previous page
1/47
Next page
43
able to configure your Serial Supervisor, you must be logged in as admin. Other users
will be able to view which devices are active but cannot configure them.
Once you are logged in, choose the Admin/Setup option from the menu at the top of the
Home screen in the Web interface. Click External Serial consoles setup and control.
You will be presented with the Serial Consoles Attached menu, and a table with the
following headings:
#: You can assign a value (1 ~ 99) to each attached serial device. This does not
affect the configuration or operation of the device in any way, but is simply a
means to sort this list for ease of management.
Name/Description: An identifier for the Serial Supervisor device. Like the
number assignment, it is for ease of administration only.
Baud (bps): This is the communication speed for the device, and the setting here
must match the setting on the device itself (see below). All common baud rates
between 300 and 115,200 bps are supported.
Mode: Sets the character framing scheme that the NewStar Digital KVM via IP
will use with the Serial Supervisor device. You can choose from the following
selections:
8N1: Eight bits, no parity, one stop bit (default and most common)
7N1/701/7E1/7M1/7S1: Seven bits, (none/odd/even/mark/space) parity,
one stop bit
8N1/801/8E1/8M1/8S1: Eight bits, (none/odd/even/mark/space) parity,
one stop bit
8N2: Eight bits, no parity, two stop bits
Force DCD: Forces the Carrier Detect signal to be active at all times. Normally,
DCD becomes active when a new user connects and is dropped when the last
user disconnects (a response that is similar to many modems). When active, the
device will logout and reset itself if the carrier signal is lost, increasing security.
Note that this may not work with all devices and could impair proper operation in
some circumstances. The default setting is off.
Console Log: Clicking this link will open a separate Web page that will display the
last 200 characters committed to that device’s console log. Note that existing data
is overwritten automatically when the 200 character limit is reached.
(Optional, not shown) IPMI: This is an optional feature that requires the purchase
of a software upgrade on the NewStar Digital KVM via IP. Refer to Appendix D
for more information about purchasing and using the IPMI upgrade. This feature
will not appear on the menu if the upgrade is not installed.
You can make as many changes a needed on this menu at one time before applying your
changes. Once you are satisfied with the changes you have made, click Commit
changes to apply the new settings. Click Refresh at any time to see an updated list of
attached Serial Supervisor devices.
… 45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info