552651
44
Zoom out
Zoom in
Previous page
1/47
Next page
42
Appendix D: Using Optional Serial Supervisors
Background
The NewStar Digital KVM via IP offers a unique way to expand the functionality of the
base product. Using R-Port on the rear panel of NewStar Digital KVM via IP, you can
add up to 16 Serial Supervisors serial devices using a specialized daisy-chain technology.
The NewStar Digital KVM via IP includes integrated control functionality that allows you to
monitor and configure the devices with the RS-232 serial port using the interactive Web
interface. To minimize space and infrastructure requirements, the Serial Supervisor uses
a single cable to carry both power and the data signal. All configuration settings are
stored separately in each attached Serial Supervisor in non-volatile memory so that they
will not be lost in the event of a power outage or disconnection.
Connecting the Serial Supervisor to the NewStar Digital KVM via IP
The RJ-14 cable for link up the Serial Supervisor via daisy chain is similar to a phone
cable. For the first computer, connect the RJ-14 cable (provided) to the R-Port on the rear
panel of the NewStar Digital KVM via IP. Then, connect the opposite end of RJ-14 cable
to the RJ-14 port of Serial Supervisor. There are two RJ-14 ports in the Serial
Supervisor, please feel free to choose any one of them. Once you have added the first
computer to NewStar Digital KVM via IP by using the Serial Supervisor, you can
connect the second computer by using the second Serial Supervisor, please have your
second RJ-14 cable (provided with your second Serial Supervisor) to link up the first
Serial Supervisor and the second one. That’s it! And, you can link up to 16 computers.
The following diagram is shown the whole connection. For more specific information
regarding cabling, status indicators, and how to setting, refers to the user’s manual of
Serial Supervisor.
Configuring/Viewing Serial Supervisor through the Web Interface
Once you have one or more Serial Supervisor connected, you will able to configure and
manage them through the Web interface. You may need to modify the default settings on
the NewStar Digital KVM via IP to match your various Serial Supervisors’ default
configuration. Consult the documentation that came with your Serial Supervisor to
determine if you need to modify the default settings to complete the installation. To be
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info