552651

Newstar NS-841HDI Manual

29
Zoom out
Zoom in
Previous page
1/47
Next page
27
the Enter key to select it. Or, you may press Esc to exit OSD and remove the OSD
menu from the display; the status window returns to the display and indicates the currently
selected computer or operating status.
A triangle mark () to the right of a name indicates the port is cascaded to a Slave; the
number at the left of the triangle mark shows the number of ports the Slave has, i.e. 8for
an 8-port Switch. Enter key brings you one level down and another screen pops up
listing the names of the computers on that Slave. The name of the Slave will be shown at
the upper right corner of the OSD menu. It is useful to group computers and still be able to
see the group name.
An eye mark (1) on the right of a name indicates that computer is selected and monitored
in Scan mode. In the OSD, this mark can be switched on or off by function key F2 .
Press Esc key to exit OSD and to return to the selected computer; the computer name is
also shown on the screen.
Function key F1 : To edit name entry of a computer or a Slave with up to 14
characters. First, highlight a port then press F1 followed by name entry. Valid characters
are ‘A’~’Z’, ‘0’~’9’, and the dash character. Lowercase letters are converted to uppercase
ones. Press Backspace to delete a letter one at a time. Non-volatile memory stores all
name entries until you change, even if the unit is powered down.
Function key F2 : To switch the eye mark (1) of a computer on or off. First, use the
Ï and Ð arrow keys to highlight it, then press F2 to switch its eye mark on or off. If
Scan Type is 'Ready PC +1', only the power-on and eye mark selected computers will be
displayed sequentially in Scan mode.
Function key F3 : To lock a computer from unauthorized access. To lock a device,
highlight it then press F3 . Now, enter up to 4 characters (‘A’~’Z’, ‘0’~’9, ‘-‘) followed by
Enter as a new password. A Security-enabled device is marked with a lock (±) following
its port number. To permanently disable the security function from a locked device,
highlight it, press F3 then enter the password.
If you want to access the locked device temporarily, simply highlight it and press Enter ,
the OSD will ask you for the password. After entering the correct password, you are
allowed to use the device. This device is automatically re-locked once you switch to
another port. During Scan mode, the OSD skips the password-protected devices.
Function key F4 : More functions are available by hitting F4 . A new screen pops up
displaying more functions as described below. Most of them are marked with a triangle ()
indicating there are options to choose from. Using arrow key “ Ï “, “ Ð “ to select the
functions, and then press Enter . Available options will be shown in the middle of the
screen. Again, using arrow keys “ Ï “, “ Ð “ to view options, and then press Enter to
select it. You can press Esc to exit at any time.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info