552651
32
Zoom out
Zoom in
Previous page
1/47
Next page
30
Hot Key Commands
A hot key command is a short keyboard sequence to select a computer, activate a
computer scan, etc. A hot-key sequence starts with two Left Control keystrokes followed by
one or two more keystrokes.
The short form hot-key menu can be turned on as an OSD function ( F4 : More\Hotkey
Menu) every time the left Ctrl key is pressed twice.
Left Ctrl refers to the Ctrl key located at the left side of the keyboard.
1~8/A~H refer to the number keys 1 to 8 at the upper row of the keyboard (Do not use the
keypad at the right of the keyboard) and character keys A to H (case insensitive).
Selecting a Computer
To select a computer by hot-key command you need to know the device’s channel address,
which is determined by the KVM connection. For a computer connected to the Master
switch, the address is represented by the PC port number (1~8/A~H). For example, to
access the PC plugged into port 7 of the Master switch
, type:
left Ctrl + left Ctrl + 7 1
For a computer connected to a Slave KVM, you need to know the channel address of the
Slave unit (1~8) and then the channel address of the device (1~8/A~H). (Please note that
only Master's PC 1~8 ports can be connected to a Slave.) For example, to access the
computer plugged into console port of a Slave KVM
that is plugged into Port 6 of the
Master switch
, type:
left Ctrl + left Ctrl + 6 + C 1
Auto Scan
Auto Scan automatically scans through powered computers at a fixed interval:
left Ctrl + left Ctrl + F1 1
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning until
activity stops; it then resumes with the next computer in sequence. The length of the Auto
Scan interval (Scan Rate) is adjustable (see Scan Rate on the following page). To abort
the Auto Scan mode, press the left Ctrl key twice.
NOTE: The Scan Type setting will determine whether computers must be eye-marked to
be included in the scan. See page 22 for details.
Manual Scan
Manual Scan enables you to manually switch back and forth between powered computers:
left Ctrl + left Ctrl + F2 1
Press the up or down arrow to select the previous or next computer in sequence. Press
any other key to abort the Manual Scan.
NOTE: The Scan Type setting will determine whether computers must be eye-marked to
be included in the scan. See page 22 for details.
Scan Rate
Scan Rate sets the duration between switching to the next computer in Auto Scan mode:
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-841HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-841HDI in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info