Manual NewMotion Home Advanced 2.1 (page 12 of 34) (English, German, Dutch, French)

802088

Zoom out

Zoom in

1/34

6 | Installation and electrical connection

12 / 34 5111967B_OI-II_Webasto Unite_EN

lShunt trip module control signal cable for welded relay

contact failure

Fig.23

Fig.24

1. Remove the cork (1) from the cable gland.

Fig.25

2. Insert the cable (2) into the cable hole.

Fig.26

Fig.27

3. To connect the wires to the mainboard, check the applic-

able sections depending on the function(s) to be used.

6.7.3 Locked cable function

The cable will be locked and the socket model charging station

behaves like an attached cable model.

To activate this function:

Fig.28

1. Turn off the power to your charging station.

Fig.4

2. Open the product cover as described in the installation

manual.

2 3 4 5 6

OFF

Fig.30

ON Enabled OFF Disabled

3. To enable the locked cable function, toggle DIP switch 3

into the ON position using a pointed spudger or a similar

plastic pointed tool. The DIP switch location is shown in the

above figure.

NOTE

DIP-switch settings

DIP-switch settings are optional. All settings can be

changed by using the Setup App, or the web configura-

tion interface (see chapter8, "Webasto Unite Configur-

ation Interface" on page 17).

uThe most recent made setting will always be ap-

plied.

uThe current setting is shown in the web configura-

tion interface.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NewMotion Home Advanced 2.1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NewMotion Home Advanced 2.1 Manual

Product: