802088

NewMotion Home Advanced 2.1 Manual

11
Zoom out
Zoom in
Previous page
1/34
Next page
Installation and electrical connection | 6
5111967B_OI-II_Webasto Unite_EN 11 / 34
6.7 Setting the DIP switches
1
ON
2 3 4 5 6
Fig.19
1 Reserved
2 Enable Potential free contact/Load shedding
3 Locked Cable Function (only for socket models)
4, 5, 6 Power Optimizer (requires optional accessories)
NOTE
DIP-switch settings
DIP-switch settings are optional. All settings can be
changed by using the Setup App, or the web configura-
tion interface (see chapter8, "Webasto Unite Configur-
ation Interface" on page 17).
uThe most recent made setting will always be ap-
plied.
uThe current setting is shown in the web configura-
tion interface.
6.7.1 Enable Potential free contact/Load
shedding
Your charging station can be controlled with external potential-
free contacts (on/off function) for integration of the charging
station into:
lcar park automation systems
lenergy supplier ripple control devices
ltimer switches
lphotovoltaic inverters
lauxiliary load control switches
lexternal key lock switches
letc.
1
ON
2 3 4 5 6
ON
OFF
Fig.20
ON Enabled OFF Disabled
1. Set DIP switch 2 in the ON position to enable the external
enable function, or in the OFF position to disable the ex-
ternal enable function.
1
CN2
EVSE RL
1
4
2
3
2
Carpark
Automation
System
Control
12
3 4
RL
AB
Fig.21
Pos. Description
CN2 Connector 2
RL Relay
A Main board charging station
B Car Automation System Control
Pin assignments connector 2
1 Pin 1
2 Pin 2
Pin assignments Relay
1, 2 Potential free contacts
3, 4 Relay coil
Fig.22
Terminal Function
1 (CN2-1) Potential free contact /Load shedding
2 (CN2-2) Potential free contact/Load shedding
3 (CN2-3) Load Shedding Input +
4 (CN2-4) Load Shedding Input -
5 (CN2-5 Power optimizer meter B (COM)
6 (CN2-6) Power optimizer meter A (COM)
7 (CN2-7) -
8 (CN2-8) -
1. Mount the wiring according to the illustration and table
above.
– Charging is disabled when the external relay contacts
are in the open position.
NOTE
DIP-switch settings
DIP-switch settings are optional. All settings can be
changed by using the Setup App, or the web configura-
tion interface (see chapter8, "Webasto Unite Configur-
ation Interface" on page 17).
uThe most recent made setting will always be ap-
plied.
uThe current setting is shown in the web configura-
tion interface.
6.7.2 Data cable connection
Following data connection cables can be inserted through the
cable holes:
lExternal enable input cable
lPower optimizer measurement cable (external meter)
lEthernet connection cables
lLoad shedding triggering signal cable
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NewMotion Home Advanced 2.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NewMotion Home Advanced 2.1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info