802088
33
Zoom out
Zoom in
Previous page
1/34
Next page
Checklist for the installation of the Webasto charging station | 16
5111967B_OI-II_Webasto Unite_EN 33 / 34
Other features (Connected models)
Product weight 5 kg
Weight with package 7.1 kg
AC Mains Cable Dimensions For three-phase models Ø 18 - 25 mm
For one-phase models Ø 13 - 18 mm
Cable Inlets AC Mains / Ethernet / Modbus
Protection class IP54
Impact protection IK10
Usage conditions -35 °C to 55 °C (without direct sunlight)
5% - 95% (relative humidity, non-condensing)
0 - 4,000m
16 Checklist for the installation of the Webasto charging station
Charging station Webasto Unite
Charging power 7,4 kW 22 kW
Serial number
Material number
System type TN/TT IT Split phase
General: Applic-
able/
com-
pleted
Installation, electrical connection and initial operation of the charging station must be carried out by an electrician.
The charging station has not been installed in an explosion sensitive area (EX zone).
The charging station has been installed in a location where falling objects cannot damage the charging station.
The charging station has been installed in an area protected from direct sunlight.
Please underline the weather conditions on the installation date: sun, rain, overcast, snow or other
______________________________________________ .
The location of the charging station should be selected such that vehicles cannot inadvertently collide with it.
The legal requirements for electrical installations, fire protection, safety regulations and escape routes have been met.
The customer/user was informed how the Webasto Unite voltage is switched off with the installation-side protective
devices.
The cable bushing for the mains lead and signal cable has been installed during installation.
Tools and installation remnants have been removed from the charging station before closing the cover.
The prerequisite of a clockwise phase sequence is met during installation.
The locally applicable test logs should be drawn up during initial start-up and a copy should be given to the customer.
Electrician/contractor:
Place: Signature:
Date:
Place: Signature:
Date:
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NewMotion Home Advanced 2.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NewMotion Home Advanced 2.1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info