629278
13
Zoom out
Zoom in
Previous page
1/40
Next page
NX-10 User Manual 13
Disarming your system after an alarm
2. The siren stops ringing, the keypad stops beeping and the alarm
memory is displayed.
3. The alarm memory displays the zone(s) where the alarm has occurred.
In this case, a burglary alarm occured in zone 8.
4. Press the keys to scroll through the different zones listed in
the alarm memory.
5. Press OK. Your system is ready to be armed.
Note: You can view the alarm memory at any time from the quick user
menu or user menu. Enter the quick user menu by pressing OK and then
pressing
key, select Alarm Memory and press OK.
Note: Press NO key to clear any incorrectly entered user code or other
information.
If you want to enable a screensaver immediately, press at the same time
both keys.
1. Enter your code to disarm the system. When entering code, the number
of code digits entered is displayed in the right lower corner (1, 2, 3, etc.).
There are several different types of alarm. A burglary alarm and a tamper alarm activate a continuous siren. A fire alarm activates a pulsed
siren. All alarms cause the keypad to beep rapidly. For information on responding to a fire alarm, see page 14. If the EN50131 Mode is set
in the system, see page 38 for a description of the system behavior and the fault acknowledging/overriding procedure.
........
........
........
........
........
8 Alarm Memory
Zone 8
OK
System Ready
Type Code to Arm
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-10 - V3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-10 - V3 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NetworX NX-10 - V3

NetworX NX-10 - V3 Quick start guide - Dutch - 2 pages

NetworX NX-10 - V3 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info