629278
38
Zoom out
Zoom in
Previous page
1/40
Next page
NX-10 User Manual 38
Master Mode
User menu option, Master Mode, is not displayed in the EN50131
mode. It means switching the keypad to the Master Mode is not
possible, and only single partition mode is available.
Silent Exit
User menu option, Silent Exit, is not displayed in the EN50131 mode.
It means that silent exit mode is not available.
HomeText commands
In the EN50131 Mode, the HomeText command “user code” does not
allow to change another person’s user code. You can only change
your own user code with this command.
Fault acknowledging/overriding
In the EN50131 Mode, every fault in the system must be
acknowledged or overriden by the user. Faults indicate problems in
the system. Some of them can be solved by the user (like closing an
open zone) but others may require calling the installer. Active critical
faults prevent arming of the system.
You can tell you need to acknowledge faults when “Zones Not Ready”
or “Service Required” is displayed on the keypad. Fault
Acknowledging/Overriding mechanism can be activated by pressing
the “#” key or is activated automatically after disarming an alarmed
partition.
Faults are displayed according to their importance, starting with the
most important fault. There is a possibility to scroll up/down the fault
list by using up/down arrows. If there is only one fault and overriding
is not possible, no arrows are displayed.
When any fault is still active, arming of the system is impossible, and
the fault must be fixed first (or overriden if possible) to allow the user
to arm the system.
An active fault is displayed as:
A non-active but unconfirmed fault is displayed as:
and can be confirmed by pressing “OK”.
When the system is armed, overriding is not allowed and the
following message is displayed instead:
Fault Name
Active
Fault Name
OK-Confirm
EN50131 Mode
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-10 - V3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-10 - V3 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NetworX NX-10 - V3

NetworX NX-10 - V3 Quick start guide - Dutch - 2 pages

NetworX NX-10 - V3 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info