710462
17
Zoom out
Zoom in
Previous page
1/155
Next page
Set Up the Access Point With a Connection to Your Internet
Modem
You can connect the access point directly to your a LAN port on your DSL or cable Internet modem and let
the access point function as both a WiFi access point and a router. In this configuration, WiFi clients can
connect to the access point and access your network and the Internet and you also can attach a switch to
the access point to enhance your network. Because you cannot use Power over Ethernet (PoE) in this setup,
the access point requires a power adapter, which is an option that you can purchase.
Figure 7. Set up the access point with a connection to a LAN port on your Internet modem
To connect the access point to your Internet modem:
1. Unplug your Internet modem’s power, leaving the modem connected to the wall jack for your Internet
service.
2. If your Internet modem includes a battery backup, remove the battery.
3. Use an Ethernet cable to connect the yellow WAN PoE port on the access point to a LAN port on the
Internet modem.
Do not use the LAN port on the access point for a connection to the Internet modem.Note
4. If your Internet modem includes a battery backup, reinsert the battery.
5. Plug in your Internet modem’s power and turn on your Internet modem.
6. To attach a switch to the access point, use an Ethernet cable to connect the switch to the black LAN
port on the access point.
7. Connect the power adapter to the access point and plug it into an electrical outlet.
The Power LED of the access point lights solid amber. After about one minute, if the access point is
connected to a DHCP server (an Internet modem usually also functions as a DHCP server), the Power
LED turns solid green and the access point is ready for you to perform the initial configuration.
Install the Access Point in Your Network and Access It for Initial Configuration
17
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC510 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info