710462

Netgear WAC510 Manual

15
Zoom out
Zoom in
Previous page
1/155
Next page
Set Up and Connect the Access Point to Your Network or
Internet Modem
The access point can function in AP system mode as a WiFi access point in your existing network or in
Router system mode as both a WiFi access point and router connected to your DSL or cable Internet modem.
The following sections describe how you can connect the access point to your network or Internet modem:
• Set Up the Access Point With a PoE Network Connection on page 15
• Set Up the Access Point With a Non-PoE Network Connection on page 16
• Set Up the Access Point With a Connection to Your Internet Modem on page 17
To set up your access point, follow the procedure in one of these sections.
Set Up the Access Point With a PoE Network Connection
You can connect the access point to a Power over Ethernet (PoE) switch in your network and use the access
point in its default AP mode, which lets WiFi clients connect to the access point and access your network
and the Internet. The switch must be connected to a network router, which, in turn, must be connected to
the Internet, for example, through an Internet modem. If you use a PoE connection, the access point does
not require a power adapter.
Figure 5. Set up the access point with a PoE connection to your network
To set up the access point with a PoE connection to your network:
1. Connect an Ethernet cable to the WAN PoE port on the access point.
Do not use the LAN port for a connection to the PoE switch.Note
2. Connect the other end of the Ethernet cable to a PoE port on a PoE switch that is connected to your
network and to the Internet.
Install the Access Point in Your Network and Access It for Initial Configuration
15
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC510 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info