710462
19
Zoom out
Zoom in
Previous page
1/155
Next page
To connect to the access point over WiFi using an iOS or Android mobile device:
1. On your mobile device, go to the app store, search for NETGEAR Insight, and download the app.
2. Open the NETGEAR Insight app and log in to your existing NETGEAR account or create a new account
to log in with.
3. Follow the prompts in the NETGEAR Insight app to discover and register the access point on the network
so that you can configure and manage the access point.
If the access point is not connected to the Internet, you can still use the NETGEAR
Insight app to configure the access point by connecting to the access point’s default
SSID.The default SSID is on the access point label on the bottom of the access point
and is shown in the format NETGEARxxxxxx-SETUP, where xxxxxx is the last six
hexadecimal digits of the access point’s MAC address. The default password is
sharedsecret.
Note
Connect Over WiFi Using a WiFi-Enabled Computer or Mobile
Device
This section describes how to connect to the access point for the first time over WiFi using a WiFi-enabled
computer or mobile device (without using the NETGEAR Insight app).
To connect to the access point over WiFi using a WiFi-enabled computer or mobile device:
1. From your computer or mobile device, connect over WiFi to the access point’s default WiFi network.
The default SSID is on the access point label on the bottom of the access point and is shown in the
format NETGEARxxxxxx-SETUP, where xxxxxx is the last six hexadecimal digits of the access point’s
MAC address. The default password is sharedsecret.
2. On the computer or mobile device, open a web browser and, in the address bar, enter
www.routerlogin.net (or www.aplogin.net).
You can use www.routerlogin.net (and www.aplogin.net) only during initial setup of
the access point.
Note
Install the Access Point in Your Network and Access It for Initial Configuration
19
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC510 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info