710462
18
Zoom out
Zoom in
Previous page
1/155
Next page
During initial configuration of the access point, you must change the default system
mode of the access point from AP mode to Router mode.
Note
For information about accessing the access point for initial configuration, see Connect to the Access Point
for Initial Configuration on page 18. After initial configuration, change the default system mode of the access
point from AP mode to Router mode (see Change the System Mode to Router Mode or AP Mode on page
106).
Connect to the Access Point for Initial Configuration
After you set up the access point, you can use several methods to connect to it for initial configuration.
You can either connect to the access point by using the NETGEAR Insight app on an iOS or Android mobile
device or by using the local browser interface.These two types of access are mutually exclusive.
The NETGEAR Insight app provides ease of access but lets you configure a limited number of features.
The local browser interface lets you configure all features that are available on the access point.
For information about how you can connect to the access point by using the NETGEAR Insight app, see
Connect Over WiFi Using an iOS or Android Mobile Device on page 18.
The following sections describe how you can connect to the access point by using the local browser interface
(follow the procedure in one of these sections):
Connect Over WiFi Using a WiFi-Enabled Computer or Mobile Device on page 19
Connect Over Ethernet Using a Computer Connected to the Same Network on page 23
Connect Over Ethernet Using a Directly Connected Computer on page 26
If your network does not include a DHCP server (or a router that functions as a DHCP
server) and you do not perform the initial configuration of the access point as described
in one of these sections, you can connect only two clients to the access point and the
access point can provide an IP address to only two clients. To prevent this situation,
make sure that you perform the initial configuration of the access point.
Note
Connect Over WiFi Using an iOS or Android Mobile Device
You can install the NETGEAR Insight app on an iOS or Android mobile device and set up the access point
(and perform many other tasks as well).
For information about the NETGEAR Insight app, see the NETGEAR knowledge base articles at
netgear.com/support.
Install the Access Point in Your Network and Access It for Initial Configuration
18
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC510 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info