667811
7
Zoom out
Zoom in
Previous page
1/24
Next page
1 COAX 1-2, OPT 1-2
Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
2 COAXIAL OUT, OPTICAL OUT,
Connect the optical or coaxial DIGITAL OUT to a corresponding
digital audio input of compatible devices such as receivers,
computer soundcards or other digital processors.
NOTE
Only digital sources can be streamed through COAXIAL/OPTICAL
DIGITAL OUT.
3 +12V TRIGGER
+12V TRIGGER OUT
The +12V TRIGGER OUT is used for controlling external equipment
equipped with a +12V trigger input.
Connect this +12V TRIGGER OUT to the other equipment’s
corresponding +12V DC input jack using a mono cable with 3.5mm
male plug.
This output will be 12V when the M32 is ON and 0V when it is either
OFF or in standby mode.
+12V TRIGGER IN
With this input triggered by a 12V DC supply, the M32 can be switched
ON remotely from Standby Mode by compatible devices such as
ampliers, preampliers, receivers, etc. If the 12V DC supply is cut o,
the M32 will return to standby mode.
Connect this +12V Trigger input to the remote devices
corresponding +12V DC output jack using a mono cable with
3.5mm male plug. The controlling device must be equipped with a
+12V trigger output to use this feature.
4 IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the M32 from a remote location.
5 RS 232
NAD is a certied partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the M32 via
compatible external controllers.
Refer to the NAD website for information about RS232 Protocol
documents and PC interface program.
6 SPEAKERS
The M32 has two sets of SPEAKER connections which are identical
in function (parallel connection). They allow for bi-wiring.
Connect M32’s Right speaker terminals marked “R +” and “R-” to
the corresponding “+” and “-“ terminals of your designated right
speaker. Repeat the same for M32’s Left speaker terminals and
corresponding left speaker.
Double check the speaker connections before powering up the
M32.
BI-WIRING
Most high quality loudspeakers oer the option of Bi-wiring. This
separates the High Frequency (HF) crossover from the Low Frequency
(LF) crossover. This oers enhanced performance by preventing LF
returned currents from aecting the HF performance. To bi-wire,
remove the “links at the loudspeaker that connect the LF and HF
sections (these are provided for convenience when a single wire
connection is used).
NOTES
Use 16 gauge (American Wire Gauge or AWG) or lower stranded wire.
Connections to the M32 can be made with banana-type plugs.
Bare wire or pins can also be used by loosening the terminal’s plastic
nut, making a clean, neat connection and re-tightening. To minimize
the danger of a short circuit, ensure that only 1/2-inch of exposed wire
or pin is used to connect and no loose strands of speaker wire.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD M32
SERVICE
COMPUTER
COAX1
COAX2
OPT1
OPT2
AES/EUB IN
M o d u l a r
D e s i g n
C o n s t r u c t i o n
M o d u l a r
D e s i g n
C o n s t r u c t i o n
M o d u l a r
D e s i g n
C o n s t r u c t i o n
L
R
MM
LINE 1
PHONO
PRE-OUT/SUBW
LINE 2
L
R
L
R
INPUT OUTPUT
R
L
1 2 3 4 5 6 7
1098 11 12 13 14 15
ATTENTION!
Please ensure that the M32 is powered o or unplugged from the main power source before making any connections. It is also advisable to power down or
unplug all associated components while making or breaking any signal or AC power connections.
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M32 DirectDigital DAC Amplifier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M32 DirectDigital DAC Amplifier in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M32 DirectDigital DAC Amplifier

NAD M32 DirectDigital DAC Amplifier User Manual - German - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - Dutch - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info