667811
6
Zoom out
Zoom in
Previous page
1/24
Next page
1 POWER INDICATOR
This indicator will be amber when the M32 is in standby mode.
When the M32 is powered up from standby mode, this indicator
will change from amber to bright white color.
2 o(STANDBY)
Touch the o (Standby) button on top of the unit to switch the
M32 ON from standby mode. The Power indicator will change from
amber to bright/white color.
Press and hold o (Standby) button until M32 switches back to
standby mode.
One press or touch of the o (Standby) button will not switch the
M32 to standby mode. This is intended to avoid unintentionally
setting the M32 to standby mode if one happens to just touch or
press the o (Standby) button at operating mode.
The Power indicator will change to amber color at standby mode.
The o (Standby) button cannot activate the M32 if the rear panel
POWER switch is o.
Refer also to +12V TRIGGER - REAR PANEL.
IMPORTANT NOTES
For the o (Standby) button to activate, the following must occur:
a The supplied power cord from the M32 must be plugged in to a
power source.
b The rear panel POWER switch must be set to ON.
3 HEADPHONE
A /” stereo jack socket is supplied for headphone listening and will
work with conventional headphones of any impedance.
The volume, tone and balance controls are operative for
headphone listening. Use a suitable adapter to connect
headphones with other types of sockets, such as 3.5mm “personal
stereo jack plugs.
4 REMOTE SENSOR
Point the HTRM 2 remote control at the remote sensor and press
the appropriate buttons.
Do not expose the remote sensor of the M32 to a strong light
source such as direct sunlight or illumination. If you do so, you may
not be able to operate the M32 with the remote control.
Distance: About 23 ft. (7 m.) from the front of the remote sensor.
Angle: About 30 degrees in each direction of the front of the
remote sensor.
5 DISPLAY (TOUCH PANEL DISPLAY)
Displays visual and menu information according to the settings
selected.
The following display options are accessible via the touch panel
display - Main, Media, Mode, EQ and Setup.
Touch the screen to select any of the display options, to see their
corresponding menu options, or settings.
6 VOLUME
The VOLUME control adjusts the overall loudness of the signal sent
to the loudspeakers. The Volume control is characterized by perfect
signal tracking and channel balance. It provides a highly linear and
low noise operation.
Turn clockwise to increase the volume level and counter clockwise
to lower it.
The default volume level is -20dB.
IDENTIFICATION OF CONTROLS
FRONT PANEL
© NAD M32
5 63 4
2
1
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M32 DirectDigital DAC Amplifier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M32 DirectDigital DAC Amplifier in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M32 DirectDigital DAC Amplifier

NAD M32 DirectDigital DAC Amplifier User Manual - German - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - Dutch - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info