667811
9
Zoom out
Zoom in
Previous page
1/24
Next page
MDC CLASSIC UPGRADE SLOTS
The delivery format of digital content is constantly changing in pure digital
systems like the M32. Each of these formats typically requires specialized
hardware and software, often with licensed IP and content copy protection.
To address continuous technological evolution, NAD has placed all digital
interface circuitry of the M32 on easily upgradable modules, called Modular
Design Construction (MDC). The M32 includes one MDC module – the DD
SPDIF which has digital coaxial, optical and AES/EBU input terminals.
There are three optional MDC modules – the DD HDM-1, the DD AP 1 and
the MDC BluOS modules. Remove covers to install the optional Modular
Design Construction (MDC) modules.
Consult with your NAD dealer on how to procure the DD HDM-1, the DD
AP 1 and MDC BluOS modules and their installations to the M32.
DD HDM-1 (DIRECT DIGITAL HDMI)
The DD HDM-1 oers three HDMI input terminals and one HDMI output
with video pass through. With DD HDM-1 installed, the M32 can be the
heart of a Video 2.0” system using the mandatory 2 channel linear PCM
soundtrack from Blu-ray or DVD to make a compelling high denition
theater presentation. DD HDM-1 is fully 3D video compatible without
surround sound decoding or video processing.
A HDMI OUT: Connect the HDMI Monitor OUT to a
HDTV or projector with HDMI input.
B HDMI 1 -3: Connect to the HDMI OUT
connectors of source components such as DVD
player, BD player or HDTV satellite/cable box.
WARNING!
Before connecting and disconnecting any
HDMI cables, both the M32 and the source must be powered OFF and
unplugged from the AC outlet. Failure to do so may cause permanent
damage to equipment connected via HDMI sockets.
DD AP 1 (DIRECT DIGITAL ANALOG-PHONO)
DD AP 1 uses high quality Analog-to-
Digital conversion to make analog sources
compatible with M32’s pure digital circuitry.
The PHONO circuit has impedance settings for
Moving Magnet (MM) and Moving Coil (MC)
with gain automatically set.
The DD AP 1 consists of the following line
level input terminals – PHONO, SINGLE-ENDED
(ANALOG) and BALANCED.
A PHONO: Input for either a MM or MC
phono cartridge. Connect the twin RCA
lead from your turntable to this input.
B SE IN (SINGLE-ENDED): Use a twin RCA-to-RCA lead to connect these
sockets to the left and right analog output of a CD player, preamplier
or processor.
C PHONO GROUND CONNECTOR: Turntables normally include a single
wire earth lead. Use the M32 phono ground connector to connect this
lead. Unscrew the terminal and insert the ground wire into the hole.
Tighten the terminal to secure the lead.
D BALANCED: Connect XLR audio sources to these connectors. Ensure
that proper pin congurations are followed – Pin 1: Ground, Pin 2:
Positive (signal live) and Pin 3: Negative (signal return).
MDC BluOS
BluOS is a music management software developed by NAD’s sister brand,
Bluesound. Integrating MDC BluOS will add BluOS network and internet
music streaming with advanced music management to your M32.
Refer to “MDC DD BluOS Mounting Instructions” and” Configuring DD
BluOS” for instructions on how to install and integrate the MDC BluOS with
the M32.
IMPORTANT NOTE
BluOS audio cannot be streamed through digital output terminals.
BluOS PLAYBACK CONTROLS
Using the HTRM-2 remote control, the following control buttons are
applicable for BluOS playback. Set DEVICE SELECTOR to MP for BluOS
playback control.
4 : Resume playback from pause mode.
; : Pause current playback.
7 : Skip back to the beginning of current song.
8 : Skip forward to the next song.
REPEAT : Repeat song, playlist, all or repeat o.
RANDOM : Play songs/playlist in random order.
IDENTIFICATION OF CONTROLS
REAR PANEL
A
B
A
B
C
D
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M32 DirectDigital DAC Amplifier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M32 DirectDigital DAC Amplifier in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M32 DirectDigital DAC Amplifier

NAD M32 DirectDigital DAC Amplifier User Manual - German - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - Dutch - 24 pages

NAD M32 DirectDigital DAC Amplifier User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info