Manual Multiplex ROYALevo7 (page 53 of 77) (English)

30268

Zoom out

Zoom in

1/77

ROYAL evo 7

Page 52

18.6. Sub-menu: New Model

New models are set up using the New Model sub-

menu.

When you open the sub-menu, the following display

appears:

You must work through all the menu points

Template,

Servo Config. and Mode to set up a new model, and

then confirm your action with

OK.

18.6.1. Parameter:

Memory No.

Information field; cannot be changed

The Memory number for the model you are about to

set up is dictated by the transmitter; it is always the first

free memory. The

Memory No. cannot be changed. If

you wish to store the new model in a different memory,

you can subsequently copy the new model to another

memory (Î 18.2.).

Note:

If there is no vacant memory, the screen displays the

number

-1 and the warning: Attention! No free

memory!

. If this should happen, press EXIT to leave

the menu. You cannot set up another model unless you

first erase a model which you no longer need (Î 18.3.).

18.6.2. Parameter:

Template

In this menu point you inform the transmitter what type

of model you wish to set up. First you have to differen-

tiate between a helicopter and fixed-wing model. There

are several model templates in each basic type:

Model templates for fixed-wing models

BASIC 1

For simple model aircraft with up to

one aileron servo, also other models

BASIC 2

For model aircraft with two aileron

servos

ACRO

For powered aerobatic models and

hot-line electric models

DELTA

For deltas and flying wings

GLIDER

For gliders and electric gliders with

two aileron servos

4 FLAPS

For gliders and electric gliders with

four-flap wings

Model templates for helicopters

HELImech

For model helicopters with mechani-

cal swashplate mixers

HELIccpm

For model helicopters with electronic

swashplate mixers (CCPM)

The advantage of using model templates for setting up

a new model is that many of the basic settings are

automatically defined correctly, leaving you just to carry

out final adjustments. The template determines which

mixers can be used for the selected model type, and

which control assignment is used (“which transmitter

control operates which function?”), which channels the

servos are connected to, and so on. A full description of

the model templates will be found in Section 20.

18.6.3. Parameter:

Servo Config.

The servos must be connected to the receiver in a par-

ticular sequence defined by the model template you

have selected. Every radio control system manufacturer

has its own standard in terms of servo sequence at the

receiver output sockets. The

Servo Config. menu of

the ROYALevo7 allows you to select the sequence of ser-

vos at the receiver:

MPX

MULTIPLEX standard

HITEC

HiTEC standard

FUTABA

FUTABA standard

JR standard

For a full description of the servo sequence please refer

to the description of the model templates (Î 20.).

18.6.4. Parameter:

Mode

The Mode parameter is used to determine which stick

controls which of the primary functions (Î 13.3.1.). This

setting can be changed at any time.

18.6.5. Parameter:

Once you have set up all the parameters described

above, you must press the ENTER button or one of the

3D digi-adjustors on the

OK field to conclude the setting

up of the new model. The transmitter automatically

switches to the new model you have just set up, and

you can immediately start adjusting the settings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Multiplex ROYALevo7 Manual

Product: