30268
52
Zoom out
Zoom in
Previous page
1/77
Next page
ROYAL evo 7 - Instructions
Page 51
ENGLIS
H
The active flight phase is marked x. Only the active
flight phase can be copied. The following steps are nec-
essary:
1. Select the active phase (
x ) using the UP / DOWN
buttons ( / ), or use one of the two 3D digi-
adjustors.
2. Press the 3D digi-adjustor (or ENTER) twice;
the cursor jumps to the “
x “.
3. Select the destination phase for the copy using the
UP / DOWN buttons ( / ) or one of the two 3D
digi-adjustors;
the “
x “ changes to a “ c “ = copy.
5. Press the ENTER button or one of the 3D digi-
adjustors to conclude the copy process.
18.5. Sub-menu: Properties
The Properties sub-menu is a dynamic menu. The dis-
play may look as shown below, depending on the
model type (fixed-wing or helicopter) of the active
memory:
18.5.1. Parameter:
Template
Fixed-wing models and helicopters
L
Information field; cannot be changed
This parameter indicates which model template was
used to set up the current model (Î 18.6.2.). The field is
only for the user’s information, and cannot be changed.
18.5.2. Parameter:
Mode
Fixed-wing models and helicopters
I
Parameter affects the active model
only
Adjust. range Mode 1 ... Mode 4
The mode (stick mode) parameter is used to define
which stick controls which function in the model. The
mode can be changed at any time either here or in the
Setup / Control menu (Î 13.3.1.).
18.5.3. Parameter:
Assignment
Fixed-wing models and helicopters
L
Information field; cannot be changed
This parameter shows the assignment (which transmit-
ter control operates which function) with which the cur-
rent model was set up. The field only provides informa-
tion to the user, and cannot be changed.
18.5.4. Parameter:
Throttle curve
Model helicopters only
I
The parameter affects the active
model only
Adjust. range ON, OFF
Here you can determine whether your current model
helicopter requires a throttle curve to control the throt-
tle function, or whether fixed values are to be used (e.g.
electric helicopters with brushless motor in “regulator”
mode) (Î 14.1.11.).
18.5.5. Parameter:
Shift
, US/ES
For
US/ES language set only, with
fixed-wing models and helicopters
I
Parameter affects the active model
only
The menu point “Shift Switch” only appears if you are
using the
US/ES language set. When other makes of
receiver are used it is sometimes necessary to adjust
Shift to suit the receiver:
+ = Positive shift
- = Negative shift
! Note:
If you intend using the system with components made
by a variety of manufacturers, please note that careful
testing is essential. It is not possible for MULTIPLEX
Modellsport GmbH to guarantee that its systems will
function perfectly with products made by other com-
panies.
18.5.6. Parameter:
Name
Fixed-wing models and helicopters
I
Parameter affects the active model
only
This is where you can enter a name for your model; the
name can be up to 16 characters long. When you set up
a new model, it is initially assigned the name of the
model template you have used. The text for the name is
entered using the keypad; the procedure is described in
Section 11.1.3.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info