30268

Multiplex ROYALevo7 Manual

50
Zoom out
Zoom in
Previous page
1/77
Next page
ROYAL evo 7 - Instructions
Page 49
ENGLIS
H
18. Main Menu Memory I
The ROYALevo7 has 15 model memories, numbered se-
quentially. You can assign a name up to 16 characters
long to each model memory.
The model data is stored in non-volatile memory, and
therefore cannot be lost even if you disconnect the
transmitter battery from the transmitter.
In addition to memory management (switching, copy-
ing, erasing), you can also set up new models (Î 18.6.)
and manage flight phases (Î18.4.) in this menu.
18.1. Sub-menu: Select model
(switch memories)
When you move to the Select model menu, you will
see a list of all 15 model memories:
The active model memory is marked
x.
Empty model memories have no model name:
“
--------“.
It is possible to select an empty memory, but not acti-
vate it.
To switch models, select the appropriate memory using
the UP / DOWN buttons ( / ) or one of the two 3D
digi-adjustors, then press the ENTER button or one of
the 3D digi-adjustors. The screen then switches to the
last used status display. The transmitter is immediately
ready for use, and the model can be flown.
18.2. Sub-menu: Copy
Making a copy of one model memory can be a useful
time-saver if, for example, you wish to set up a new
model which is similar to one you already own, or if you
want to make experimental changes to the settings of a
model without losing the existing settings. The copy
process copies all the settings for the transmitter con-
trols, mixers, servos, timers, model name and trims.
There are four steps to copying a model memory:
1. Select the model
Select the model which is to be copied using the UP
/ DOWN buttons ( / ), or one of the two 3D digi-
adjustors.
2. Confirm your selection
Press the ENTER button or one of the 3D digi-
adjustors.
The letter “c” (= copy) now appears after the
model name (Fig. 1).
3. Define the destination
Select a target memory for the copy using the UP /
DOWN buttons ( / ) or one of the two 3D digi-
adjustors. The model name of the model to be cop-
ied and the “c” go with you on the search (Fig. 2).
4. Confirm the destination
Press the ENTER button or one of the 3D digi-
adjustors.
Fig. 1 Fig. 2
x If the destination memory is empty, the copy is cre-
ated immediately.
x If the destination memory is already occupied, the
security query appears: “Overwrite existing model?”.
x At this point you can interrupt the copy process by
pressing the ENTER button or one of the 3D digi-
adjustors.
x If you wish to overwrite the existing model, press
the REV/CLR button.
After the copy process the previously active model is
called up again.
18.3. Sub-menu: Erase
If you wish to erase a model memory, first select the
memory, then press the ENTER button or one of the 3D
digi-adjustors. A security query now appears:
x If you wish to erase it,
press the REV/CLR button to confirm your action;
x If you do not wish to erase it,
press the ENTER button or a 3D digi-adjustor.
Erasing is not possible if you have selected the mem-
ory marked
x, as this memory is currently active.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info