30268
49
Zoom out
Zoom in
Previous page
1/77
Next page
ROYAL evo 7
Page 48
The timer can be used in two different modes:
1. Set the alarm to 0:00:00
The timer starts at zero, runs upward, counts the
time cumulatively, and is stopped and re-started by
the switch assigned to it. There is no alarm when
the timer is used in this way.
2. Set the alarm to a time other than 0:00:00
The timer starts at the set alarm time, runs down-
ward and triggers an alarm when the selected time
has elapsed.
Alarm pattern:
x at the end of each full minute:
short double beep (ÈÈ)
x from 5 seconds before the set alarm time:
short double beep at one-second intervals (ÈÈ)
x when the alarm time is reached
long double beep (È --- È ---)
Line 3:
Difference (display only)
Here the screen displays the time which is also shown in
status display 2. It is the difference between the time
and the alarm. The arrow preceding the difference indi-
cates the direction of running of the timer:
' running upward
# running downward
The difference runs downward until the alarm time is
reached, and upward if the alarm time is reached or ex-
ceeded. The preceding arrow indicates upward or
downward.
Line 4:
Switch
At this point you can select the transmitter control
which you wish to use to start and stop the timer. You
can select any control apart from the aileron, rudder
and elevator sticks.
Press the ENTER button or a 3D digi-adjustor to open
the input field. The following display then appears:
The transmitter control which you now select to operate
the timer will operate the timer in all models which use
the same assignment (Î 18.6.).
If you now press the ENTER button to confirm your ac-
tion, you can assign the desired transmitter control as
the “Timer Switch” simply by operating it. We call this
process QUICK SELECT.
Leave the transmitter control at the end-point at which
the timer is to run. Close the input field by pressing the
ENTER button or one of the 3D digi-adjustors.
Special case: “H / THR-CUT” and “M / TEACHER“ but-
tons:
There are two modes of operation involving the “H” and
“M” buttons. The mode is activated according to the
method which you use to leave the “Switch” field when
assigning the timer switch:
1. Toggle
“:
Press button = timer runs
Press button again = timer stops
2. Latch
“:
Button pressed = timer runs
Button not pressed = timer stops
The switch you have selected to control the timer (in
our example: F) and the position of the ON state (in our
example:
' = forward) are displayed in line 4. If the
switch is at the “Timer ON position”, an asterisk
'* ap-
pears after the arrow. The control for the switch is also
shown in status display 2 after the timer time:
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex ROYALevo7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex ROYALevo7 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex ROYALevo7

Multiplex ROYALevo7 User Manual - German - 77 pages

Multiplex ROYALevo7 User Manual - Dutch - 110 pages

Multiplex ROYALevo7 User Manual - French - 77 pages

Multiplex ROYALevo7 User Manual - Italian - 75 pages

Multiplex ROYALevo7 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info