779576
29
Zoom out
Zoom in
Previous page
1/36
Next page
29
4. Press
OK
softkey to confirm. The screen will display
EMPTY
.
12.10 Deleting a One-Touch Memory Record
1. In idle mode, press DIR.
2. Press the corresponding One-Touch Memory (1-10) button you wish to delete.
3. Press DELETE.
4. The screen will display
DELETE?
.
5. Press
OK
softkey to confirm.
NOTE
Press EXIT to cancel the Delete function.
12.11 Dialing a Directory Record
12.11.1 Dial a directory record while in Talk mode
1. Press s, HEADSET, a LINE button, or pick up the corded handset.
2. Press DIR.
3. Using VOL + and VOL - of the navigation button to scroll to the desired record.
4. Press
DIAL
softkey to dial the phone number.
12.11.2 Dial a directory record while viewing it
1. In idle mode, press DIR.
2. Using VOL + and VOL - of the navigation button to scroll to the desired record.
3. When the desired number is displayed, press s, HEADSET, a LINE button, or pick up the
corded handset to dial the phone number.
12.12 Dialing a One-Touch Memory Record
12.12.1 Dial a One-Touch Memory record while in Talk mode
1. Press s, HEADSET, a LINE button, or pick up the corded handset.
2. Press the corresponding One-Touch Memory (1-10) button you wish to dial and the number
will automatically be dialed.
12.12.2 Dial a One-Touch Memory record while viewing it
1. In idle mode, press DIR.
2. Press the corresponding One-Touch Memory (1-10) button you wish to dial.
3. Press s, HEADSET, a LINE button, or pick up the corded handset and the number will
automatically be dialed.
13 Answering System Operation
There are two mailboxes in the system.
MAILBOX 1
is for Line 1 and
MAILBOX 2
is for Line 2.
For memo recording, you can select which mailbox is used to record the memo.
13.1 Answering System On/O
Press and hold Ans Sys for 2 seconds, the screen will display the
ON/OFF STATUS
setting menu.
To set the Answering System On or O, please refer to section 8.7.1. The Answering a system light
illuminates when the function is activated.
If Ans Sys indicator on the base is flashing, pressing it will go to
PLAY MESSAGES
menu.
Otherwise, pressing the button will display the
ON/OFF STATUS
setting menu for 3 seconds.
13.2 Recording Incoming Messages
The unit will answer incoming calls or routed calls after X rings (according to your Ring Delay
setting) and play the outgoing message greeting. After hearing the greeting followed by a long
beep, the caller can leave a message. If there is a new message recorded in the unit, the Ans Sys
indicator on the base will flash, and the envelope icon will flash on the display.
To set the maximum recording time/message length, please refer to section 8.7.10.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info