779576

Motorola ML25254 Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
27
11.6 Call Waiting Caller ID
This feature allows you to see who is calling when you hear the call waiting beep. The caller
identification information appears in the display after you hear the tone.
1. To connect to the waiting call, press FLASH and your first call will be put on hold.
2. To switch between the two calls, press FLASH.
IMPORTANT
To use all the features of this unit, you must subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To know who is calling while you are on the phone,
you must subscribe to Caller ID with Call Waiting Service.
12 Directory and One-Touch Memory Log
You may store data in the Directory (up to 99 records) or the One-Touch Memory (10 buttons
located to the right of the number pad on the base). The Directory and each One-Touch Memory
Log stores up to 16 characters and 32 digits.
The records in the Directory are stored by alphabetic ascending order.
12.1 Adding a New Directory Record
1. In idle mode, press DIR.
2. Press
NEW
softkey. The screen displays
ENTER NAME:
.
3. Using the dial pad to enter a name.
More than one letter is stored in each of the number keys. For example, to enter “Lorraine,”
press the 5 key three times for the letter L, press the 6 key three times for the letter O, press
the 7 key three times for the letter R, and so on.
If you make a mistake, press DIR or CID of the navigation button to move the cursor forward or
backward. Or, press
CLEAR
softkey to delete one character at a time.
The name field cannot be left empty.
4. Press
SAVE
softkey. The screen displays
ENTER NUMBER:
.
5. Use the dial pad to enter a telephone number.
Press j twice to insert a pause in a number if necessary.
6. When you are finished, press
SAVE
softkey.
7. Using VOL + and VOL - of the navigation button to scroll to the desired
VIP TONE MELODY
.
8. Press
SELECT
softkey to complete.
NOTE
If an incoming call number matches this record the VIP Tone Melody will ring.
If
MEMORY FULL
shows in the display, you need to delete one or more records before repeating
above steps to add a new directory record.
12.2 Adding a Record in the One-Touch Memory Log
1. In idle mode, press
STORE
softkey.
2. The screen displays
SELECT BUTTON LOCATION
.
3. Press a One-Touch Memory (1-10) button to save the record in that memory location.
If there is a record stored in selected memory location. Press
REPLACE
softkey to confirm
overwrite or press
BACK
softkey, then repeat the step 1-3 to select a new location.
4. The screen displays
ENTER NAME:
.
5. Using the dial pad to enter a name.
More than one letter is stored in each of the number keys. For example, to enter “Lorraine,”
press the 5 key three times for the letter L, press the 6 key three times for the letter O, press
the 7 key three times for the letter R, and so on.
If you make a mistake, press DIR or CID of the navigation button to move the cursor forward or
backward. Or, press
CLEAR
softkey to delete one character at a time.
The name field cannot be left empty.
6. Press
SAVE
softkey. The screen displays
ENTER NUMBER:
.
7. Use the dial pad to enter a telephone number.
Press j twice to insert a pause in a number if necessary.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info