779576

Motorola ML25254 Manual

20
Zoom out
Zoom in
Previous page
1/36
Next page
20
NOTE
‘Toll Saver’ can save you the cost of a call when you access your message from another phone.
• If you have new messages, the unit answers after the 3rd ring.
• If you have no new messages, the unit answers after the 5th ring.
• You can hang up after the 3rd or 4th ring and save the pay telephone or long distance charge.
7.7.7 Message Length
From the
ANSWERING SYS.
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
MESSAGE LENGTH
. Press
SELECT
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
LINE 1
or
LINE 2
and press
SELECT
softkey.
3. Using VOL + and VOL - of the navigation button to scroll to
1 MINUTE, 2 MINUTES
or
3 MINUTES
.
4. Press
SELECT
softkey to save your selection.
7.7.8 Call Screening
If you wish incoming messages to be played over the speakerphone, activate the Call Screening
feature. To take the call, press the corresponding LINE button and the Answering System will
stop recording.
From the
ANSWERING SYS.
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
CALL SCREENING
. Press
SELECT
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
7.7.9 Message Alert
This feature set your Answering System to give an alert tone every 10 seconds when there are
new messages.
From the
ANSWERING SYS.
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
MESSAGE ALERT
. Press
SELECT
softkey.
2. Using VOL + and VOL - of the navigation button to scroll to
ON
or
OFF
.
3. Press
SELECT
softkey to save your selection.
7.7.10 Remote Password
You can access the Answering System from a tone dialing telephone in another (remote) location.
To do this, you must turn on the remote function and set a three-digit remote password.
The remote password is required for remote access, and it prevents unauthorized access to your
Answering System.
From the
ANSWERING SYS.
menu:
1. Using VOL + and VOL - of the navigation button to scroll to
REMOTE PASSWORD
. Press
SELECT
softkey.
2. The base will display the last-set remote password (or, if the device is new or has been reset to
default, the base will display 000).
3. Press
CLEAR
softkey to delete the current remote password.
4. Using the dial pad to enter your new 3-digit remote password.
5. When you are finished, press
SAVE
softkey.
7.8 Restore Settings
The feature allows you to reset some menu settings to the original default settings.
1. In idle mode, press
MENU
softkey to go to the main menu.
2. Using VOL + and VOL - of the navigation button to scroll to
RESTORE SETTINGS
. Press
SELECT
softkey.
3. The screen will display
LOAD TO DEFAULT?
.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info