779576

Motorola ML25254 Manual

21
Zoom out
Zoom in
Previous page
1/36
Next page
21
4. Press
YES
softkey to reset the unit to default setting. The phone will reboot with the default
settings.
If you do not want to reset, press
NO
softkey.
8 Basic Operation
8.1 Making Calls with the Corded Handset
1. Pick up the handset and the base will select the first available line. If both lines are available,
Line 1 will be used first.
Or, pick up the handset and press LINE 1 or LINE 2 button to select the line you want.
2. Wait for a dial tone, then dial a phone number.
3. Hang up the handset when finished.
8.2 Making Calls with the Speakerphone
1. Press s and the base will select the first available line. If both lines are available, Line 1 will be
used first.
Or, press LINE 1 or LINE 2 button to select the line, and the base speaker will activate.
2. Wait for a dial tone, then dial a phone number or press a One-Touch Memory (1-10) button to
dial stored phone number.
3. Press s when finished.
NOTE
After pick the line, the call timer starts to run until all the calls are hung up. The timer serves for
both 2 lines.
8.3 Making Calls with a Wired Headset
1. Plug the headset into the Headset jack on the side of the base.
2. Adjust the headset to rest comfortably on top of your head or over your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. Press HEADSET and the phone will select the first available line. If both lines are available,
Line 1 will be used first.
5. Wait for a dial tone, then dial the phone number.
6. Press HEADSET when finished.
NOTE
Although this device will accept a variety of standard 2.5mm telephone headsets, Motorola does
not guarantee compatibility with third party devices. Performance may vary depending on the
quality of the headset.
8.4 Pre-Dialing
1. With the phone idle, manually enter the telephone number. The telephone number will show in
the display. The maximum pre-dialing number length is 32 digits, if the number is over
32 digits, it will emit an error tone.
2. You can either press
DIAL
softkey, s, LINE 1, LINE 2 or lift the corded handset up from the base
to take a line and the number will automatically be dialed.
8.5 Answering Calls
1. Pick up the handset to answer the call in the receiver mode.
Or, press s to answer the call in speakerphone mode.
Or, press the corresponding LINE button to answer the call in speakerphone mode.
Or, press HEADSET to answer the call in headset mode.
2. When you are finished, hang up the corded handset.
Or, press s (if you are speaking in speakerphone mode) to end the call.
Or, press HEADSET (if you are speaking in headset mode) to end the call.
NOTE
You can adjust the call volume by pressing VOL + and VOL - of the navigation button during a call.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Motorola ML25254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Motorola ML25254 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info