1. The robot is suitable for hard floor and low to medium pile carpet.
2. This robot is not suitable for very uneven surface. Do not use in long pile / tick carpet. Fold carpet fringes
under the carpet before starting operation.
3. Please note that this robot will collect dust and small particles. It will not clean paper, plastic bags and other
large debris. It will get entangled in wires, so please declutter floor surfaces before using.
4. Do not leave bottles, lamps or other breakables on the floor.
5. Do not use in tight spaces less than 38cm wide as the robot may get blocked.
6. Do not use on wet or greasy dust.
The robot battery is user replaceable. If the battery stops keeping its hold please re-order replacement from the
manufacturer or service center.
1. When fully charged plug out the charger and power cord. An alarm sound will play.
2. Push the dust-bin release button and pull out the dust-bin. Flip the robot over, and push the battery
into the slot.
3. Push the battery until clicks in.
4. Flip the robot over again, and insert the dust bin back into the body.
1. Remove the dust-bin first and flip the robot over.
2. Push the two battery hook buttons simultaneously. The battery will pop out automatically.
3. Remove the battery.
1. 2. 3. 4.
2. 3.1.
8
Notes:
Battery installation and charging
Battery Removal