632510
35
Zoom out
Zoom in
Previous page
1/41
Next page
35
English
5.8 DCA groups
Any channels can be grouped in 6 DCA groups� Unlike as with sub-
groups, the signals of a DCA group are not mixed: It is only possible
to simultaneously control the signal levels of all channels contained
in a group by means of the corresponding fader (DCA = Digitally
Controlled Amplifier)� The mixing ratio of the levels adjusted via the
channel faders will be retained, i� e� the gain values of the DCA controls
and the channel faders will be taken into account:
Example:
Channel fader = −6 dB, DCA fader = +3 dB resulting gain = –3 dB
5.8.1 Creating a DCA group
To create or modify a DCA group:
1) Press the key DCA (13)� The key will start flashing and the screen
view “DCA Set” (fig� 26) will be displayed�
2)
Tap the appropriate button DCA 1– 6 on the right side of the screen
to select the DCA group to be created�
3)
Use the keys (7, 8, 11) or tap the appropriate control on the screen
to select all channels that are to be included in the DCA group� The
keys will light up and the corresponding sections on the screen will
be highlighted in colour
Channels linked as a stereo pair can only be selected together
4) To deselect a channel, press the appropriate key again�
5)
To remove all assignments to the DCA group, tap the button “DCA
Clear”� A confirmation prompt will appear: Tap “Yes” or press the
key ENTER (20) to confirm�
6)
Press the key DCA (13) or tap the button “DCA Set”� The mixer will
go to the view “Mixer”; the DCA group just created will be selected�
In the mixer views, individual names can be assigned to DCA groups
just like to the other channels (
chapter 6�1)�
CH01
3.0dB
CH09
3.0dB
AUX1 AUX2 AUX3 SUB1AUX4 SUB2 SUB3 SUB4
3.0dB
CH08
3.0dB
CH16
CH02
3.0dB
CH10
3.0dB
3.0dB
CH03
3.0dB
CH11
3.0dB
3.0dB
CH04
3.0dB
CH12
3.0dB
3.0dB
CH05
3.0dB
CH13
3.0dB
3.0dB
CH06
3.0dB
CH14
CH07
3.0dB
CH15
3.0dB3.0dB 3.0dB
Drums
DCA 1
Aux & Fx
1.Select DCA Group1to 6
2.Highlight/Assign Channels
to DCA Group
3.Click "DCA Set" to Confirm!
DCA 3
DCA 4
DCA 4
DCA 5
DCA 5
DCA 6
Back Vocals
System
DCA Clear
Back
To
Previous
CH17-18 CH19-20
Long Fader
FX1 FX2 USB
DCA 6
DCA 2
DCA Set
Fig. 26 DCA Set
Note: The coloured symbols DCA 1– 6 in the upper left of the screen view “As-
sign” (fig� 9) also indicate that a channel has been assigned to a DCA group:
DCA 1 DCA 2 DCA 3
DCA 4 DCA 5 DCA 6
In the figure to the left, the channel has been
assigned to the DCA groups 1 and 4�
Fig. 27
5.8.2 Mixing by means of DCA groups, muting groups
1) To control the level of a DCA group, press the key DCA 1– 6 (10)
for the group desired� The screen will display the view “Mixer”
(fig�20), the key will be illuminated and the corresponding button
on the screen will be highlighted in colour� In addition, all channels
assigned will be highlighted in colour on the screen�
If you try to call up a DCA group that has not been defined yet, a
corresponding message will be displayed�
2)
The motor fader (24) can now be used to operate the fader of
the group selected and thus to adjust the levels of the channels
contained in this group� Or the group can be muted with the
button MUTE (23)�
3) The button SOLO (23) can be used to set all channels of the group
to the Solo bus for monitoring (
chapter 5�1�5); for all the other
channels, the assignment to the Solo bus will be removed�
4) To go to the view that shows the 6 faders of all DCA groups on a
single screen, press the key MIXER (22)�
Note: The setting of the DCA group will remain in effect when another DCA
group is selected and operated� When a channel is assigned to multiple DCA
groups, the resulting gain for this channel will depend on all DCA faders assigned�
5.9 Digital outputs
At the jack USB AUDIO (35), the sum signal MAIN will always be
available�
When the extension module for digital inputs and outputs is installed
(
chapter 4�4), the signal of each analog input channel and output
channel as well as the signal of the Solo bus will be additionally avail-
able as a digital output signal�
1)
Use the key DIGITAL (22) to call up the screen view “Digital Output”
(fig� 28) (press the key twice, if required)�
2)
Tap the appropriate section on the screen view to switch the digital
output for the corresponding channel ON or OFF
3) When a channel has been selected (section highlighted in blue),
the rotary knob PARAMETER ADJUST (18) can be used to adjust
the gain for the digital signal�
When no extension module is installed, “Please insert the optional
digital card!” will be displayed�
CH01
0.0dB
CH09
0.0dB
AUX1
-10.5dB
SUB1
0.0dB 0.0dB 0.0dB0.0dB
CH10
0.0dB
0.0dB
CH16
0.0dB
CH11
0.0dB
CH12
0.0dB
CH13
0.0dB
CH14
0.0dB
CH15
0.0dB
CH02
0.0dB
CH03
0.0dB
CH04
0.0dB
CH05
0.0dB
CH06
0.0dB
CH07
0.0dB
CH08
0.0dB
AUX2
0.0dB 0.0dB
AUX3
SUB2
AUX4
SUB3 SUB4
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
0.0dB
CH17-18
0.0dB 0.0dB
Main Solo
OFF
OFF OFF
Mixer
DCA
Long
Faders
Parameter
AUX1
-10.5dB
Digital Output
0.0dB
CH19-20
ON
Digital Input
ONONON
ON
Fig. 28 Digital Output
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMIX-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMIX-20 in the language / languages: English, German as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info