632510
31
Zoom out
Zoom in
Previous page
1/41
Next page
31
English
3)
Use the keys , (18) or tap the appropriate section on the screen
to select the filter to be adjusted�
4)
Use the keys
,
(18) or tap the appropriate button on the screen
to select the parameter to be adjusted (“Frequency”, “Q”, “Gain”)�
5) Use the rotary knob PARAMETER ADJUST (18) to change the value
of the parameter selected�
6)
For a fast reset of the equalizer setting, press the key FLAT EQ
(19)� A confirmation prompt will appear: Press the key ENTER (20)
to confirm�
7) To deactivate the equalizer, tap the button ON again�
For a coarse pre-adjustment of the filter, tap and drag the filter curve
on the screen�
1.75kHz
Frequency
4.0
Q
+11dB
Gain
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
Load
Copy
Save
Mixer
DCA
OFF
Flat EQ
HPF
LPF
Frequency
Frequency
Type
Type
Q Gain Type
EQ1
Frequency
EQ2
EQ3
EQ4
250.0Hz
20.0kHz
BW12
78.7Hz
BW12
400.0Hz
1.75kHz
4.93kHz
3.5
3.0
4.0
3.5
0.0dB
0.0dB
+11dB
0.0dB
Select
Channel
CH08
-10.5dB
CH08
Long
Faders
dB
4
8
2
+6
-6
20Hz 50
-12
-18
-24
100 200 500 1K 2K 5K 10K 20K
Parameter
Mute
Solo
+11dB
Gain
Fig. 14 Parametric equalizer
5.5.2 Graphic equalizer
1) Press the key GEQ (21) once or press the key PEQ/GEQ (22) twice�
The screen view of the graphic equalizer will be displayed (fig� 15)�
2) Use one of the keys AUX 1– 4 (11), SUB 1– 4 or MAIN (7) to select
the Aux way, the subgroup or the sum channel MAIN�
3) Tap the button ON to switch on the equalizer� The button will be
highlighted in colour
4)
Use the keys , (18) or tap the appropriate control on the screen
to select the frequency to be adjusted�
5) Use the rotary knob PARAMETER ADJUST (18) or the keys
,
(18) to adjust the gain�
6)
For a fast reset of the equalizer setting, press the key FLAT EQ
(19)� A confirmation prompt will appear: Press the key ENTER (20)
to confirm�
7) To deactivate the equalizer, tap the button ON again�
Note: Even when two Aux ways or subgroups are linked as a stereo pair,
the graphic equalizers of both channels can be adjusted separately from
each other
Load
Copy
21 3 4 5 6 7 8 9 1 0 11 12 13 14 15 16
0(dB)
17
-6
18 19 20 21 22
-12
-18
-24
23 24 25 2 6 27 28 29 30 31
20
25 40 63 100 160 250 400 630
31.5 50 12580 200 315 500 800 1.25K 12.5K2K
20K
3.15K 5K 8K
1K 1.6K 2.5K 4K 6.3K 10K 16K
Up
+24
+18
+12
+6
oD wn
Left Right
Frequency
Gain
200Hz 0.0dB
Save
Default
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
Mixer
DCA
ON
Flat EQ
Select
Channel
Main
Long
Faders
Fig. 15 Graphic equalizer
5.6 Overview of the signal processing
For an overview of the signal processing made to a channel, call up
the screen view “Channel” (fig� 16)�
1) With the sum channel AUX, SUB or MAIN selected, press the key
ASSIGN (22) once� With an input channel or with effect channel
FX 1 or FX 2 selected, press the key twice�
2)
To switch the noise gate, the compressor, the equalizer or the delay
on and off, tap the appropriate button ON/OFF or the button Delay�
To inverse the polarity of the signal, tap the button INV
3) The rotary knob PARAMETER ADJUST (18) can be used to adjust
the delay time or the threshold value (Compressor, Gate) provided
that the corresponding function has been switched on and the
parameter has been selected by means of the keys ,,
,
(18)
or by tapping the appropriate section on the screen�
4)
For additional adjustments, tap one of the curves to go to the
corresponding view�
0.0ms
Delay Time
Polarity
Delay
INV.
Link
Main
Gate
Threshold Threshold
EQ
Compressor
-62dB -8dB
My Channel
OFF
OFF
Flat EQ
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
Mixer
DCA
Load
ON
Copy
Save
Select
Channel
CH08
9dB
CH08
Long
Left
Right
Faders
Pan
Parameter
Mute
Solo
-8dB
Comp
Channel
Fig. 16 Channel
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMIX-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMIX-20 in the language / languages: English, German as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info