632510
29
Zoom out
Zoom in
Previous page
1/41
Next page
29
English
5.3.5 Muting channels
All input channels, subgroups, Aux ways, internal effect ways and
the sum channel MAIN can be separately muted when they are not
needed, for example� This muting will also apply to any extracted
signal (AUX, FX) of the muted channel, no matter whether it has
been set to PRE or POST
1) Use the appropriate key (7, 8, 11) to select an input channel, Aux
way, subgroup or the sum channel MAIN�
Note: A subgroup or an Aux way can only be selected via these keys when
the key AUX-FX MODE (12) is not illuminated; if required press the key so
that it extinguishes�
2) To mute, press the key MUTE (23) so that it lights up�
3) To unmute, press the key MUTE again�
When the function “Pre-Fader Listening” is switched on [key PFL (17)
illuminated], it is possible to monitor the signal (
chapter 5�1�5)
while muting is activated�
With the key FX MUTE (14), the two internal effect ways can always
be directly muted or unmuted simultaneously�
5.3.6 Overview of the signal paths
The screen view “Assign” (fig� 9) offers an overview of the signal
path of an input channel or FX channel� The screen view can be called
up with the key ASSIGN (22) (channel must be selected); it will be
automatically displayed when the key AUX-FX MODE (12) is pressed
to assign an Aux way or internal effect way�
Assign
Main
Sub1 Sub2 Sub3 Sub4
FX1
AUX2 AUX4AUX1
FX2
AUX3
-10.5dB -10.5dB -10.5dB -10.5dB -10.5dB -10.5dB
Sends
PRE PREPRE PRE
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
Link
Load
Save
Copy
Long
Mixer
DCA
Faders
DCA Assign
DCA 1 DCA 2 DCA 3
DCA 4 DCA 5
DCA 6
POST POST
Select
Channel
9dB
CH08
Left
Right
Pan
Parameter
Mute
Solo
CH08
Aux 1
-10.5dB
48V
INV.
Fig. 9 Assign
The screen view “Routing” provides an excellent overview of all as-
signed signal paths within the mixer, related to a sum channel:
1) Press the key SYSTEM (16) twice�
2) Use the appropriate key (7) or (11) [not (23)!] to select the sum
channel (AUX, SUB, FX, MAIN) to be displayed in the overview�
3) Figure 10 is an example overview of a subgroup� For each input
channel and each internal effect way, the overview indicates
whether it is assigned to the subgroup (ON) or not (OFF)� To change
an assignment, tap the appropriate button on the screen�
4) Figure 11 is an example overview of an Aux way� For each input
channel and each internal effect way, the overview indicates the
signal part assigned to the Aux way and whether the signal is
picked up ahead of the channel fader (PRE) or after the channel
fader (POST)�
To change the position of the signal pick-up, tap the appropriate
button on the screen� To adjust the signal part, tap the appropriate
control on the screen and then use the rotary knob PARAMETER
ADJUST (18)�
CH01 CH08CH02 CH03 CH04 CH05 CH06 CH07
CH09 CH16CH10 CH11 CH12 CH13 CH14 CH15
CH17-18 CH19-20 FX1 FX2 USB
Select
OFF
ON
OFF
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
Mixer
DCA
Long
SUB1
OFF
Faders
ON
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Fig. 10 Routing SUB 1
CH17-18
CH01 CH08CH02 CH03 CH04 CH05 CH06 CH07
CH09 CH16CH10 CH11 CH12 CH13 CH14 CH15
CH19-20 FX1
OFF
OFF
PRE PRE
Assign
Channel
System
Routing
PEQ
GEQ
FX 1
FX 2
Gate
Comp
PRE
PRE
PRE
PRE
PRE PRE
-11.0dB
PRE
PRE
PRE
-11.0dB
PRE PRE
PRE
PRE
PREPRE
PRE
PRE
PRE
Mixer
DCA
Select
AUX1
Long
Faders
Parameter
CH01
OFF OFF OFF
OFF OFF
OFF OFF OFF OFF OFF OFFOFF OFF
OFF OFF OFF OFF
USB
PRE
OFF
FX2
POSTALL
OFF
Fig. 11 Routing AUX 1
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Monacor DMIX-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Monacor DMIX-20 in the language / languages: English, German as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info