475319

Mitsubishi WD-62628 Manual

93
Zoom out
Zoom in
Previous page
1/124
Next page
Chapter 7. Troubleshooting 93
General TV Operation
Symptom Suggested Solution
14 A device does not respond to button presses
from the remote.
• RemotehasnotbeensetupforNetCommand®use.
• Theincorrectmanufacturerwasselectedduringsetup.SelecttheChangesetting
from the Setup menu and then the device to display the manufacturer selection.
Change if necessary.
• Thedeviceisnotsupportedandkeyshavenotbeenlearned.
• TherequestedfunctionisnotsupportedbyNetCommand.Verifythatthe
function is supported or keys are learned.
• TheIRemitterisincorrectlyplaced.MakesuretheIRemitterisfacingtheIR
sensor in the device.
• TheIRemitterisnotpluggedintotheIRemitterOutputNetCommand.
• TheIRemitterisfacingtheTVscreen,causingdoublesignals.BesurethattheIR
emitter cannot send to the TV.
15. The TV Speaker icon or A/V Receiver icon is
grayed out and not selectable.
Select the Change setting from the Edit NetCommand menu, and then
select the device (for example VCR). Once the Connection screen is
displayed, check if the audio check box is selected for the TV input and/
or AVR input.
16. Devices are grayed out in the Device Selection
menu or the PIP Selection menu.
• Arecordingisinprogress.Canceltherecordingtoselectthedevice.
• Digitalchannels,digitaldevices,memorycards,andPCscannotdisplayinthe
PI P.
17. Cannot see the A/V Receiver menu. The A/V Receiver is not connected to any input of the TV. To check the
A/V Receiver menu, temporarily plug into an unused input of the TV.
Then select Review from the Setup Menu, turn the input On to view the
A/V Receiver menu.
18. The REC button is not working, or, on the
Transport menu, the record key is grayed out and
not available.
• Thedevice,suchasaDVDplayer,doesnotsupportrecording.
• RecordingscannotbeinitiatedfromtheTransportmenuwhenusinganIEEE
1394 device. Press REC instead. The Record menu displays allowing setup of a
recording.
19. When ChannelView™ list is displayed, information
appears incomplete
Available information is sent from the broadcaster or cable provider. No
other data is available.
20. Program to be recorded was correctly selected
from ChannelView, however, incorrect program
was recorded.
The broadcaster supplied program information that was incorrect and/or
was changed after a recording was added to the Record List.
21. Incomplete ChannelView program recorded. Recording device may lack sufficient blank space to make a full
recording.
22. ChannelView program recording failed.
• ConnectionandcompatibilityissueswithIEEE1394(FireWire®)digitaldevices.
This may include too many Firewire devices in use at one time, or the recording
device not understanding the record command.
• Televisionlostpowerlongenoughtolosecurrentclocktime.
• AnalogVCRpowerwasleftoff.
23. TV is not responding after pulling out a memory
card during playback.
Press STOP or wait until playback is complete before removing memory
card.
24. TV can’t play or stop a memory card.
• NetCommandwasnotsetup.WithoutNetCommandenabled,youcanonlyuse
ENTER to play and CANCEL on the TV remote to control the memory cards. See
Appendix D for programming the remote control.
• TurntheTVoffandthenbackon.
25. Can’t see a thumbnail picture in the JPEG menu,
or can’t see a track/song name in the Playlist
menu.
File does not meet file standards for playback.
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-62628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-62628 in the language / languages: English as an attachment in your email.

The manual is 7,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info