Midland CT2000 instruction guide | 19
Memory channels
CT2000 allows you to store up to 203 channels.
The channels let you store the frequency and data. So that you don’t have to
re-program the same data repeatedly and you can immediately tune on the
desired channels.
Storing a channel
• Make sure the radio is in frequency mode. You can use the V/M control on
the microphone or on the front panel of the radio to switch from channel
to frequency mode.
• Set all the desired parameters to the channel you want to store (frequency,
tones, oset, etc).
• Keep pressed V/M for 2 seconds, the icon showing the channel number will
start blinking on the display. Select the desired channel by rotating the knob
or using the UP/DOWN keys on the microphone.
• Press the F button on the radio or FUN on the microphone to store the
channel. To delete the memory press MENU on the mike.
Quick storage of a memory channel
It is possible to quickly store the VFO settings of the first memory channel
available.
• In frequency mode press FUN + MON. The VFO settings will be stored on
the first memory channel available.
Note: In channel mode this function copies the channel in use on the first channel
available.
To recall a channel
• Make sure the radio is in frequency mode. You can use the V/M control on
the microphone or of the front panel to switch from channel to frequency
mode.
• To select the channel number to recall, you can edit the number on the
keypad, rotate the knob or use the UP/DOWN keys on the microphone.
Note: In case you use the keypad you have to edit all 3 digits: for example, channel
1, you will edit “0”,”0”, “1”.
Deleting a channel
• Be sure the radio is in channel mode. You can use the V/M control of the