738655

Midland CT2000 Manual

21
Zoom out
Zoom in
Previous page
1/38
Next page
Midland CT2000 instruction guide | 17
Quick setting of CTCSS and DCS tones
It is possible to activate the CTCSS or DCS tones in tx and rx with a quick
setting on the keypad.
• Press FUN and then MENU. The display will show T to indicate that a
CTCSS tone in tx is active.
• Press F + MENU again to activate the CTCSS tones in rx. T SQ will appear
on the display of the radio.
• To change the tone press FUN and then [3]. With the UP/DOWN keys
on the microphone select the desired CTCSS tone in tx. Press FUN again
to change the CTCSS tone in rx. Select the desired tone with the UP/
DOWN keys on the microphone.
• To activate a DCS code in tx push FUN + MENU twice, till the display
shows DCS: it indicates that a DCS code in tx and rx is active.
• To change a DCS code press F and then [3]. You can select the desired
code with UP/DOWN keys.
Transmitting a repeater access tone
• Press PTT and DOWN at the same time to transmit a repeater access
tone. The tone set by default is 1750 Hz.
• If you want to change the tone frequency follow these steps:
• Press MENU on the mike or keep pressed F on the front panel to enter
the radio menu;
• Select option no. 3 “Utilities”;
• Select “Radio Setting” and then “Repeater Tone”;
• Now you can choose amongst these options:
1750 Hz
2100 Hz
1000 Hz
1450 Hz
• Push PTT on the mike to confirm your selection;
• Press FUN to exit the menu and return to standby condition.
Activating the frequency inversion
The frequency inversion can be activated only if a frequency oset (positive or
negative) is enabled.
• To activate the inversion press FUN followed by [#].
• The icons + or – start blinking on the display.
• When this function is activated, the frequency oset will be disabled and
the radio will receive on the same tx frequency.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland CT2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info