Manual Midland CT2000 (page 20 of 38) (English)

738655

Zoom out

Zoom in

1/38

16 | Midland CT2000 instruction guide

Operating with repeaters and setting of CTCSS

or DCS tones

Setting the frequency oset and its direction

• Select the rx frequency on the A or B band.

• Set the oset direction:

• Press the Pw button for 3 seconds. Select the desired oset by turning the

knob or by the UP/DOWN controls on the microphone. The oset set by

default is 0,6 MHz.

• Press Pw for 3 seconds. The display will show -: this means that an oset

with negative direction has been set, therefore the tx frequency will be lo-

wer than the rx frequency. If you want to set an oset with positive direc-

tion, press Pw again for 3 seconds. Now + will appear on the display and the

tx frequency will be higher than the rx one.

• For conﬁrmation press Pw again.

Setting the CTCSS and DCS tones

• Setting a CTCSS or DCS tone in tx

• Push MENU on the mike and keep pressed F on the front panel to access

the radio menu;

• Select option no.3 “Utilities”;

• Select “Radio Setting”, then “CTC/DCS”;

• Select “CTC Encode” or no.3 “DCS Encode”;

• Set the desired CTCSS tone or DCS code with the main knob or with the

UP/DOWN keys on the microphone

• To conﬁrm push PTT on the mike

• Press FUN to exit the menu and return to standby condition.

Setting a sub-audio tone in rx

• Push MENU on the mike and keep pressed F on the front panel to enter

the radio menu;

• Select option no.3 “Utilities”;

• Select “Radio Setting”, then “CTC/DCS”;

• Select “CTC Decode” or “DCS Decode”;

• Set the desired sub-audio CTCSS tone or DCS code with the knob or with

UP/DOWN control of the mike

• Conﬁrm your selection by pushing PTT on the mike

• Press FUN to exit the menu and return to standby condition.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland CT2000 Manual

Product: