Manual Midland CT2000 (page 25 of 38) (English)

738655

Zoom out

Zoom in

1/38

Midland CT2000 instruction guide | 21

• Select “Utilities”, then “Radio Setting” and “CTC/DCS”;

• Now select the type of tone; you can choose between “CTC Encode” or

“DCS Encode”;

• Set the desired CTCSS tone or the DCS code with the main knob or with

the UP/DOWN keys on the microphone;

• Conﬁrm by pushing PTT;

• Press FUN to exit the menu and return to stand-by mode.

Setting a sub-audio tone in rx

• Access the radio menu by pushing [menu] on the microphone or by kee-

ping pressed the F control on the fron panel of the transceiver;

• Select “Utilities”, then “Radio Setting”;

• Select “CTC/DCS”;

• Now select the type of tone, you can choose between “CTC Decode” or

“DCS Decode”;

• Set the desired CTCSS tone or DCS code with the main knob of with the

UP/DOWN keys of the microphone;

• Push PTT for conﬁrmation;

• Press FUN to exit the menu and return to stand-by condition.

Shortcuts for activating CTCSS and DCS tones

The CTCSS or DCS tones in tx and rx can also be activated with shortcuts by

keypad.

• Press FUN and then MENU. The display will show T to indicate that a

CTCSS tone in tx is activated.

• Press F and MENU again to enable also the CTCSS tones in rx. T SQ will

appear on the display.

• To change a tone press FUN and then [3]. With the UP/DOWN controls

on the microphone select the desired CTCSS in tx.

• Now press FUN again to change the CTCSS tone in rx (of course, if it

has been previously set). Select the desired tone through the UP/DOWN

controls on the mike.

• To enable a DCS code in tx press FUN + MENU for 3 times while the radio

is in stand-by mode, till the display shows DCS. DCS indicates that a DCS

code in tx and rx is activated.

To change a DCS code press F and then [3]. Select the new code with UP/

DOWN on the microphone.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland CT2000 Manual

Product: